Jump to content
SAU Community

Recommended Posts

Whats the go with import prices atm? Espically GTRs, some of them are cheap as chips and still they seem to be forsale still!! Its crazy. You see R34 GTRs for a low 60grand, i remember just a few years ago they were like 80 grand+. What changed? Did the sudden influx in 15 y.o imports cause this? If so how come so many people ask 25 grand+ for a 15 y.o R32 gtr, yet I've seen R33 GTRs on this forum for as low as the low 30s, yet they still have troubles selling them. What changed in such a short time?

Link to comment
https://www.sau.com.au/forums/topic/71092-import-prices-whats-the-go/
Share on other sites

The reason for this -> more imports are coming in to Australia.

As a result, we have plenty of cars, and plenty of sellers. Because of the 15 year rule, we had something like 15-20000 cars come in last year, and that has REALLY affected the market.

A lot of the cheaper vehicles (in terms of the 33 GTR's) are crap, high km/thrashed examples.

You can import a 99 34 GTR for as little as $55k

yeah but still I kind of feel for some people who paid 60 odd grand for a r33 gtr just 3 years ago and now you would be hard pressed to get high 30s for it unless you'd modified it a fair bit.

My question now is seeing there are so many R32 gtrs on the market right now why do they still ask high 20s low 30s for them? After all most of them are a damn old car now and are showing their age it some ways.

so its the sudden influx in importing that caused this? Is it the 15 year rule? Cause when i imported my R33 just a few months back Compliance were ringing me up asking if my car was ready cause they getting quiet on work.

i think u'll find most people bought the car at the time and have had an awesome time in it since then, aren't really worried about this, times change and so do car prices.......

and i dunno about everyone else but i buy a car with the intent of keeping it for ages, not as a 2-3 yr phase

something like that, since hte rule was introduced.

 

Figures could be off by a few thousand each way, but you get my point.

 

SEVS cars are quite low volume imports

What, since 15yo rule was introduced? Wasnt it YEARS and YEARS ago? So 20 000cars isnt that many over that space of time. But if it was just last year, yeah, thats a heapo cars.

ecause of the 15 year rule, we had something like 15-20000 cars come in last year, and that has REALLY affected the market

:bs!: there are not that many new 15 year cars on our roads, come on.. If there was that number they would be everywhere.

I'll be lucky to see any R32 in one given day, never mind a cefiro or any of the others.. it's possible there are a large number commercial vehicles, 4WD or something like that getting around I wouldn't have noticed - but not your general "sports type" import.

and i dunno about everyone else but i buy a car with the intent of keeping it for ages, not as a 2-3 yr phase

You'd probably be the rarity.. I'd say about 90% sell their import within the first 12-18 months of ownership. Some are lucky to see out even 6 months. There are not many "long term" import owners out there, who have owned the same car for more than about 2 years.

predator - I agree with your points about people keeping their imports.

The shortest I kept mine for wouldve been about 3 months. The longest about a year.

You are wrong about not seeing R32's etc around. Keep in mind there are a shitload that are still for sale, many are still at the docks here and in japan. You not only have 89 model skylines, but also 180sx, silvias, and other stuff like older pajero's. vans, porsches, etc. And other stuff that has come in from the states and europe etc, would also be classified under the 15 year rule.

So ultimately, yes, there are a shitload of older cars on our roads now. 15-20000 cars isnt really that much considering there probably would be around 10 million registered cars on our roads ?

I think the prices people are asking for R32 GTR's is a little excessive, 30K+ for a 89 model (with some mods) while you can pick up 92-94 for high 20's. People can no longer expect to get that kinda of money due to rise in supply which is slowly meeting demand.

15 year rule has brought down prices which is a good thing if you are buying but if bad if you selling...

If the 15 year rule was to remain "open" for another 2years we could all get Series 6 RX-7's for 20k and less!!! It would be just like the R32 GTR's massive influx, prices go down and heaps of kick ass rotors going around.

Without the 15 year rule most of us would still be driving (or thinking) VL-T or cordia's and imagine the prices of WRX's or even GSR lancers (GSR's still overpriced in my book).

Shame that the rule will change but at least their will be heaps of parts available, tuning packages and know how out there

My 2 cents

Tommyk

Where can i pick up a R34 GTR for 55k?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually, that's not entirely true. It's also the same motor in the 1st gen Nissan Cube but they're rare as hen's teeth.  
    • Yeah it is always worth testing and balancing actuators out of the box, just set the pressure regulator on a compressor very low (eg 5 psi) and increase it slowly to see when they both move.....unfortunately while you may be able to adjust the length of the actuator rod to minimise any difference, the actual pressure they move from is not adjustable so you need a well matched pair. And yes, the VCAM is probably contributing; the earlier in the rev range they come on boost and the slower the revs build (I think your demo was in 5th), the more you notice it.  Driving at WOT through 1st, 2nd, 3rd etc you will probably never hear it as any shuffling starts and is over super quickly
    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
×
×
  • Create New...