Jump to content
SAU Community

Recommended Posts

Hi Guys,

When I'm travelling down the freeway doing 100km/hr , yes I do occasionally stick to the speedlimit, and transfer from 4th to 5th then I get a vibration in the car at any non-idle revs.

I have a twin-pate clutch in the car and the vibration feels similar to when the plates knock together if you have the revs too low and are going to stall. I don't think it is suspension related as in 4th doing the same speed it doesn't occur.

I have a couple possible theories that I would like people to comment on if they have had similar experiences:

1. Could it be the synchros in 5th gear?

2. Could it be the diff?

3. Could it be the clutch?

4. Could it be the lightened flywheel?

I had heard that if you get a lighter flywheel then the harmonic balancer may need upgrading, I have no idea about this so would be grateful for any feedback.

Thanks.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7114-drivetrain-vibration/
Share on other sites

I have a vibration from 100 to around 120km's.

It was there with the std flywheel and now its still there with the lightened flywheel.

Maybe the Tail shafts center bearing?

Its only in 5th gear though?!?!

At the same rpm in lower gears the vibration is not there.

I also suspect my gearbox as it has had a input shaft bearing whine since i've owned it.

Possibly causing a little slack?!?!

Who knows.. :D

Thanks for the reply Joel and Fatz. No it doesn't vibrate in any gear other than 5th. I am leaning toward the flywheel as the culprit aswell. What did you do to fix the problem Fatz, have the flywheel balanced or have the harmonic balancer replaced?

Thanks for your help with this guys.

See'ya:burnout:

Hicks,

This is at the same time as I get the forged pistons in, bore the block and shotpeen the conrods. The benfits are that once it is balanced then I can rev harder, and it need to be done with the forged pistons as they weigh less than the factory items.

See'ya:burnout:

Since it only happens in 5th gear, then it seems logical that its something to do with 5th gear.

If it was flywheel or input shaft, etc, then it would likely happen in any gear.

My guess is a bearing on the 5th gear layshaft is on its way out.

Gtst-VSPEC

I have the SAME THING..!!!

Only I KNOW my 4-5th Synchro is rooted! It kicks back pretty badly. It's going in this afternoon to have it fixed, still got 3mth Stauatory warranty.

As mine only does it in 5th Gear, I too assume that it's 5th only... either way they're gonna fix it. I'll let you know how I go with it all.

-Kym.

Strich9ine,

Is your in the transition between 4th->5th or when it is in gear? Mine is when it is in gear, therefore I don't think it is the synchro, I think that it is either the 5th gear or the flywheel. Let us know how you get on anyway.

See'ya:burnout:

Originally posted by GTS-t VSPEC

Strich9ine,

Is your in the transition between 4th->5th or when it is in gear? Mine is when it is in gear, therefore I don't think it is the synchro, I think that it is either the 5th gear or the flywheel. Let us know how you get on anyway.

See'ya:burnout:

My transition from 4th-5th kicks back horribly... above 130km/h+ tho..and when changing quickly....

... then all of 5th gear i get that vibration noise....

hence i said before I KNOW my synchro is faulty, as it kicks back when changing... that may be causing the vibration in 5th gear ?

It's in for repair, I'm without a car for a few days :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
×
×
  • Create New...