Jump to content
SAU Community

Full Turbo Kit for RB25/20

XZLA.8
 Share

Recommended Posts

XZLA.8 Experienced

XZLA.8

Posted
Posted

Turbo Package suit RB20, RB25, RB30, SR20 & Tough CA18.

Turbo Package Consists Of:

A Percision T04e, (with a T/3 Flange,)

Turbo Bag

40mm Waste Gate,

Braiden lines,

Gaskets, Bolts, Chrome fittings and V-Band fitting

Also includes Hks Pod Filter.

This turbo package is capable of making 300rwkw on only 14 psi. The turbo have steel front and back wheels and are brand new are rated at 550hp. it is also 360 thrust bearing The package comes with all of the necessary fittings to make it an easy fit to any car, there is no manifold included, was bought from this forum and never put on, now selling and using cash for other investment.

PRICE DROP $850 FIRM NEED TO SELL ASAP

PM or call 0400261099

Link to comment
https://www.sau.com.au/forums/topic/71707-full-turbo-kit-for-rb2520/
Share on other sites
XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted

I think you have confussed this sale with others going around, cos I do know what turbos you are talking about and I assure you and everyone else that this is not one of them.

I will be reciving the full details on the turbo aswell as all the specs tommrrow and as soon as i do i will be posting it.

This is not the dicussion section and I will not be disscusing "cheap china turbos" in this tread, if you wish to dicuss this any further i suggest you send me a PM or call me on 0400261099, or I will be forced to report you to admin.

I also can supply the number of the person I bought this turbo from who will back me up 100% as when he bought it (two of them) he also had it checked up by a performance shop in brisbane "driftking" i belive, who said they were more then fine, once again, details via PM.

Rs,

infected flow Rising Star

infected flow

Posted
Posted

****en what is it with you posting this thread all the time if your not intrested dont ****en buy it and dont post!

this is the second thread u have done this too!

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
Conidering it has a T3 flange, will it bolt directly into the standard R33 low mount turbo manifold? Also, would it need a new FMIC to get about 10-12psi of boost? ...my baby's in deparate need of a new turbo..

It will bolt onto a R33 manifold, The factory cooler should be fine on low boost but it would be better with FMIC,

Open to offers,

Rs,

TimmyC Collaborator

TimmyC

Posted
Posted

you know how it has 0.60 Front and 0.84 Rear, which is the one most resonsible for lag ? or are they both equally responsible ? cos i really want to cut down lag as much as possible so i was looking for an A/R of around 0.64 is this right ? it would bolt straight on right ?

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
you know how it has 0.60 Front and 0.84 Rear, which is the one most resonsible for lag ? or are they both equally responsible ? cos i really want to cut down lag as much as possible so i was looking for an A/R of around 0.64 is this right ? it would bolt straight on right ?

I belive there is not much difference between The rear being 0.64 and 0.84, I have seen a 0.84 on a 4cyl and the car pulls hard all throught the rev range.

Remember big power = lag, it will bolt straight on and if you find the 0.84 to laggy for your likin then you could always take it off and replace the rear housing with a 0.64.

Rs,

hefer81 Collaborator

hefer81

Posted
Posted

a few quick questions roughly how much psi can u run through the turbo.

What brand is the wastegate and how much can it support.

Where are u located.

Has the turbo been used before rebuilt reputable etc.

If i like the answers very interested.

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
a few quick questions roughly how much psi can u run through the turbo.

What brand is the wastegate and how much can it support.

Where are u located.

Has the turbo been used before rebuilt reputable etc.

If i like the answers very interested.

PM sent

Rs,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Duncan
      NC MX5

      By Duncan · Posted

      Quite right, if you make it to that pension you deserve every cent
    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...