Jump to content
SAU Community

Recommended Posts

Nice curve, 216rwkw with 10psi?  what turbo are your running?  looks like there is more to be had with boost controller - your boost is dropping from 12 psi.  Also, why was the run stopped at 6500rpm?

Dont know if ya noticed, but the power is rapidly dropping off. I dont see the point in winding it out just for the hell of it. Not as though it was magically going to take off again!

Link to comment
https://www.sau.com.au/forums/topic/71720-woohoo-290hp/#findComment-1322971
Share on other sites

Dont know if ya noticed, but the power is rapidly dropping off. I dont see the point in winding it out just for the hell of it. Not as though it was magically going to take off again!

steve, my turbo is standard!! yeah the boost does drop and maybe with a ebc i might get more power, not sure what do you think Lumpy ?

i agrea with Lumpy, why push any harder than 6500rpm if its not going to make much difference..... im really happy with the power the boys achieved

P.s i believe my a/f meter is maxed out now anyway

Link to comment
https://www.sau.com.au/forums/topic/71720-woohoo-290hp/#findComment-1323095
Share on other sites

Kym, that was run in full shootout as per all our dyno runs.

We tune them first and then look at the final number, not work to get an artificially high number. :rofl:

That is absolutely the highest *stock* type R33 we have had on here by about 25rwhp. had us scratching our heads and what is weirder is that the stock injectors are only about 80-85% duty cycle and it's running stock fuel pressure.

All our findings in the past have said that is not possible on stock type management , ie. not Wolf .(That is not an attack at Wolf btw . )

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/71720-woohoo-290hp/#findComment-1323230
Share on other sites

Yeah, that's right Paully - wasn't yours running about 15psi back then to get such a high figure? I'm pretty sure Brett was running about 14psi for his 284rwhp run (Brett, if I'm wrong correct me here)

You're right Ken, this is ridiculously high for 10psi boost :rofl:

'grats guys :cheers:

Link to comment
https://www.sau.com.au/forums/topic/71720-woohoo-290hp/#findComment-1323263
Share on other sites

Good to see another person getting great results out of their stock turbo :)

I had a quick dig around and found one of my dyno results.... this one was only 299... but I have another one that was 302 but I dont have that one handy :)

Back when I ran that 284rwhp I was running around 14psi ... then I added the SAFCII and with a bit of tweaking we got it just over the 300rwhp mark :P ... I think the boost is down around the 12psi mark these days with that tune though as we were starting to get pinging if it went any higher...

The only mods my car has is the following in the way of performance mods...

Turbo Back HKS exhaust

HKS Air Pod

HKS Type S Intercooler

Apexi AVC-R Boost Control

Apexi SAFCII Air/Fuel Management

Heavy Duty Clutch

I am overdue for a service so I will be going to go see ken and lumpy in the near future ( probably in a few weeks time ) I will be looking for the regular change my oils and retune on the dyno to get things running smoothly (even though my car is still running great :) ) so it should be interesting to see the results there...

P.S Everyone said my turbo would fall apart in no time at all, and that was over 12 months ago and its still going strong :D

Link to comment
https://www.sau.com.au/forums/topic/71720-woohoo-290hp/#findComment-1323534
Share on other sites

Kym, that was run in full shootout as per all our dyno runs.

 We tune them first and then look at the final number, not work to get an artificially high number. :D

 

That is absolutely the highest *stock* type R33 we have had on here by about 25rwhp. had us scratching our heads and what is weirder is that the stock injectors are only about 80-85% duty cycle and it's running stock fuel pressure.

 

All our findings in the past have said that is not possible on stock type management , ie. not Wolf .(That is not an attack at Wolf btw . )

 

 Cheers

 Ken

hmmmm maybe i should get new number plates huh what do ya think maybe "freek" hehhehehehe

mrgtst.....what does your car drive like with a power curve like that... looks like it would be a handful

Ps congrads on your hp too

Pie .... yeah this is by far the best month ive ever had !!!! first the house then getting married now this hehehhehehe

Link to comment
https://www.sau.com.au/forums/topic/71720-woohoo-290hp/#findComment-1324870
Share on other sites

I'm not Ken, but no chance with stock rb20 turbo. rb25det turbo may get you around 250rwhp? an rb25det with a stock turbo will usually make max 270ish rwhp anyway

I've gone to 280 on an RB20 with nothing more than the usual cooler/fuel pump/late rb25 turbo/15psi and LUMPYROM on 3 cars now. There's more there to have, but realistically, a set of adjustable cam sprockets and bigger injectors need to go in for longer term reliability and more power.

Link to comment
https://www.sau.com.au/forums/topic/71720-woohoo-290hp/#findComment-1326503
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...