Jump to content
SAU Community

Recommended Posts

ok guys

i have a problem with my windows in the nugget

the drivers side one is fine

but the passenger one goes down but wont come back up

unless i hook power to it directly

so im guessing the motor is fine because it works when i hook an outside power source to it

could it be the relay?

any one had this problem before?

thanks for the help fellas

:)

Link to comment
https://www.sau.com.au/forums/topic/71792-r32-window-problem/
Share on other sites

Yeah, my passenger side is fine and my drivers side window can Always go up, although seriously, on warmer days it won't go down.

Someone had mentioned to take the door panel off and clean the contacts on the switch. I haven't had time yet to try - though certainly worth a go

  • 2 years later...

Could someone answer this. Ive got this problem, saves making a new thread.

Ive looked at the passenger switch and cleaned the contacts but passenger window still doesnt want to go up. Ive managed to get the window up by flicking both passenger and driver side switch for the passenger window.

The drivers side switch that controls the passenger window also only works in the down direction. Motor seems to be working fine, just the contacts somewhere im guessing.

Only thing left to check is the drivers side switch for the passenger window.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers fellas, I got a price for a r33 gtst box was 1500 including post and thought it was too cheap  
    • The SS button head cap screw on the back? If so, good to know. I presumed it was there for basic assembly and nothing more. 
    • Hello, everyone. I'm new to the forum. I have a 1989 Nissan Skyline R32 GTR. I have lost all power to the interior, including AC controls, the gauge cluster, turn signals, and windows. Stuff that still works includes the horn, brake lights, radio, and headlights. All fuses, in the interior and exterior boxes, tested good.  It starts and runs fine, just with no gauge power or anything stated above. No warning lights either. Things that I have tested: - Fusable link tested fine - No other fuses blown - Alternator good - IGN switch tested fine - With my power probe, I can backfeed power through the IGN pin to the plug on the back of the gauge cluster, and everything comes back on.    So my theory is something on the control side that sends the ignition power through the system isn't doing its job, or a wire is broken. (I would think that it is the ignition switch that would do that, but who knows?). The ignition relays don't fire (all relays tested good). So what tells them to fire other than the IGN switch?  I would really appreciate it if someone had some insight on this. I have tons of hours into this; I don't want to give up in defeat! I have the HD wiring diagram, but having all those wires laid out like that on one sheet of paper makes things pretty hard to follow.  Thanks for reading, and thanks for the replies.  Where should I look next? Thanks.
    • Install a MAP sensor pre and post throttle. Best data you could have for NA, then play with the bends and/or air box and see how much of inflection is created at WOT on the plot.
    • And gone to a new home  
×
×
  • Create New...