Jump to content
SAU Community

Recommended Posts

Compiling all the parts I have for sale, both spares and abandoned projects. Located in Sydney, can contact me at : cbaloglow (@) netspace.net.au.

Misc RB26 parts (cam covers, water/oil lines, sumps etc) - PM/email me what you need

Twin high mount exhaust manifolds

Single wastegate with cross over pipe between manifolds. Brand new

$1100

HKS pod filters - $50 each w/adapters

950cc injectors

Low impedance. Have 14 available

$150 each

RB26 gearbox

Both push + pull available, with or without shifter, transfer case etc.

$1200

Cusco 1/1.5 way front LSD

Suit RB26 sump. Used, good condition.

$800

Recaro Raptor interior

Complete set of front seats, rear seat and rails to bolt directly in to an R33. Seats are Recaro Raptor (have air pumps for lumbar support), rear was retrimmed by Recaro in the same material. No stains, tears or marks.

$2800

SR20 exhaust manifolds

Have two, one is one piece stainless runners, the other custom + ceramic coatered. Both place the turbo in the standard spot - internal wastegated.

$350 each

HKS 2530 - SR

Turbo has done less than 200kms. Zero carbon in exhaust housing, no shaft play etc. Can sell with an exhaust manifold + dump pipe

$1700 turbo only

HKS 2835R - internal gate T25 flange

Used, bolt on for SR20

$1500

AP 6 spot calipers

Can machine adapter to suit Skyline.

$2000

HKS 4-way Circuit suspension

Top of the line, remote reservoirs. Fully adjustable - used. Will fit both R33 + R34 GT-R.

$1200

Q45 AFM - $250

HKS DLI

Type I, new in box.

$750

Trust intercooler

Brand new, twin inlet. 600x300x76mm.

$1500

Trust 4 layer intercooler

Used, 600x135x300. Twin inlets, single 100mm outlet

$2000

HKS 280 degree cams + HKS buckets

Used, sell as a set. 10.8mm lift on both in/ex.

$1200

RB26 ARP head stud kit, new- $600

HKS ETC + EDA - R33, used $800

DBA 4000 series GTS-t rear rotors

Brand new in box, part numbers 4908SR and 4908SL.

$400

Adjustable upper arms - rear- R33/34 - $300

Solid rear cradle mounts - $100

HKS 3040 turbo kit RB25

Selling the turbo kit off my GTS-t. Custom ceramic coated low mount manifold, HKS 3040 turbo, exhaust to cat, AFM pipe. Turbo made 294rwkw @ 17psi, no wastegate.

$2,000

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Compiling all the parts I have for sale, both spares and abandoned projects. Located in Sydney, can contact me at : cbaloglow (@) netspace.net.au.

Misc RB26 parts (cam covers, water/oil lines, sumps etc) - PM/email me what you need

Twin high mount exhaust manifolds

Single wastegate with cross over pipe between manifolds. Brand new

$1100

Z32 AFMS

$250 each, or $300 each with HKS pod filters + adapters. Have quite a few of the HKS filters - $50 each w/adapters.

C's short shifter

Brand new in box. RB series.

$400

950cc injectors

Low impedance. Have 14 available

$150 each

RB26 gearbox

Both push + pull available, with or without shifter, transfer case etc.

$1200

Cusco 1/1.5 way front LSD

Suit RB26 sump. Used, good condition.

$800

Recaro Raptor interior

Complete set of front seats, rear seat and rails to bolt directly in to an R33. Seats are Recaro Raptor (have air pumps for lumbar support), rear was retrimmed by Recaro in the same material. No stains, tears or marks.

$2800

Trust TD06 kit

Turbo has been reconditioned with a new, larger Garrett compressor wheel and .7 A/R housing, have a choice of 6/8/10cm rear housings. Kit has turbo, manifold and wastegate.

$2700

SR20 exhaust manifolds

Have two, one is one piece stainless runners, the other custom + ceramic coatered. Both place the turbo in the standard spot - internal wastegated.

$350 each

HKS 2530 - SR

Turbo has done less than 200kms. Zero carbon in exhaust housing, no shaft play etc. Can sell with an exhaust manifold + dump pipe

$1700 turbo only

HKS 2835R - internal gate T25 flange

Used, bolt on for SR20

$1500

HKS RB26 low-mount manifolds

Standard tubular replacement manifolds. One piece runners, exceptional welds and construction. Brand new in box.

$1500

AP 6 spot calipers

Can machine adapter to suit Skyline.

$2000

BCNR33 HKS Drag suspension

New in box, fully adjustable with valve rates to suit drag racing

$1500

HKS 4-way Circuit suspension

Top of the line, remote reservoirs. Fully adjustable - used. Will fit both R33 + R34 GT-R.

$1200

Q45 AFM - $250

HKS DLI

Type I, new in box.

$750

Trust intercooler

Brand new, twin inlet. 600x300x76mm.

$1500

Trust 4 layer intercooler

Used, 600x135x300. Twin inlets, single 100mm outlet

$2000

East Bear S2 carbon bonnet - two side vents and the large vent above radiator - http://www.e-aero.jp/aeroparts/skyline/r-33/c-bon.html $1400

East Bear flat carbon bootlid - http://www.e-aero.jp/aeroparts/skyline/r-3...33/c-trank.html $900

East Bear S2 fibreglass front bar/spoiler. Clear indicators, plain style (not the one that has vents on the side) http://www.e-aero.jp/aeroparts/skyline/r-3...-33/f-bump.html $900

S2 headlight assemblies - $650

ABS plastic center grill - http://www.e-aero.jp/aeroparts/skyline/r-3...33/f-grill.html $250

Ganador mirrors R33 2 door- $450

Would prefer to work out a deal on selling the whole lot as a kit.

HKS 280 degree cams + HKS buckets

Used, sell as a set. 10.8mm lift on both in/ex.

$1200

RB26 ARP head stud kit, new- $600

HKS ETC + EDA - R33, used $800

Nismo dash

White faced, 320km/h speedo. Suit R33, used.

$650

OS Giken twin plate clutch

Used, suit push type clutch.  

$1,000

hI I WILL TAKE THE FLAT CARBON BOOLTLID IF YOU WILL SEND TO ADELAIDE FOR ME AND i WILL GIVE YOU $900 CALL ME 0415128693 ASK FOR PETE

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1327782
Share on other sites

HKS 3040 turbo kit RB25

Selling the turbo kit off my GTS-t. Custom ceramic coated low mount manifold, HKS 3040 turbo, exhaust to cat, AFM pipe. Turbo made 294rwkw @ 17psi, no wastegate.

$2,000

RB25 R33 GTS-t Power FC w/Hand controller

Tuned for the above turbo kit

$900

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1328493
Share on other sites

well are you gonna get back to ppl dude i want to buy something from you and you dont want to reply.why did yoyu go on this site to advertise?????? :headspin:

Relax mate. He is a busy man. He continually has good stuff and looks after the SAU guys. Just be patient. I think it is a bit rich you coming on here in Apr '05 and give him a spray without knowing his trader history etc... plus 8 of your 11 posts are related to trading on SAU... Sounds like getting on this site to advertise to me...

DoughBoy; I'll take one of each! free bump! :)

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1335566
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...