Jump to content
SAU Community

Recommended Posts

G'day all. What do you think if the following happened:

Your at a pub/club/night-stop and your the designated driver that night. You know your going to be at the venue for at least a few hours, so you decide to have a drink. You are a P-Plater. About half an hour to one our later, you gotta go for some reason.

The venue has a breathalyser machine up on the wall, you decide to use it given you might have some trace of alcohol left (just to be safe). You register 0.000 BAC on the machine. You begin driving and on a random check, a cop pulls you over for a breath test. You register 0.01 (or 0.02 for this matter) and you get booked.

You've lost your license for six months. You lose your job because you can't go to work.

There are no disclaimers written anywhere on the machine, even if there were, it was not easily visible.

Can you take legal action against either, the night-spot, and/or the manufacturers of the machine?

This hasn't happened to me or anyone i know, but i was thinking about it today. I figure it might happen to someone i know one day at the least.

Link to comment
https://www.sau.com.au/forums/topic/72229-something-to-think-about/
Share on other sites

I think it would depend greatly on the disclaimer (which most of the ones I've seen have) just bear in mind that the accuracy of these machines is only as good as how recently it was checked for calibration. The only really sure way of not getting caught is by not drinking.

yeah I'm sure there's a disclaimer?? also a lot of ppl dont use them properly - you're supposed to wait 10mins or it's just a breath reading.

i would beg & grovel to the cop...tell him you've only had 1 beer (he would know it was true from the reading) and hope you get let off :(

On the TV road drivers test (last year some time) they mentioned that blood alcohol levels are affected by the amount of water in the body. Alcohol is a directic which means it rids the body of water and they tested some ppl and the results were different for all but the ppl who drank lots of water had lower BAL than the rest.

Best not to drink at all if in doubt.

I know a guy that calibrates BAC anylizers and he told me that if you drink 2 litres of water, for about 15 min afterwards you won't be over .05 no matter how drunk you are....

I thought it sounded like bullchit so I gave it ago on one of those pub BAC machines and it definitely works!! but its hard work drinking 2L in one go if you've already been on the juice!

ps it works on the machines the Vic police have got not sure about other states

G'day all. What do you think if the following happened:

Your at a pub/club/night-stop and your the designated driver that night. You know your going to be at the venue for at least a few hours, so you decide to have a drink. You are a P-Plater. About half an hour to one our later, you gotta go for some reason.

The venue has a breathalyser machine up on the wall, you decide to use it given you might have some trace of alcohol left (just to be safe). You register 0.000 BAC on the machine. You begin driving and on a random check, a cop pulls you over for a breath test. You register 0.01 (or 0.02 for this matter) and you get booked.

You've lost your license for six months. You lose your job because you can't go to work.

There are no disclaimers written anywhere on the machine, even if there were, it was not easily visible.

Can you take legal action against either, the night-spot, and/or the manufacturers of the machine?

This hasn't happened to me or anyone i know, but i was thinking about it today. I figure it might happen to someone i know one day at the least.

in answer to your question...

bad luck, you can take no legal action against anyone

if fact, you should be shot for having a drink when you know you are going to be driving later and putting others on the road at risk

I know a guy that calibrates BAC anylizers and he told me that if you drink 2 litres of water, for about 15 min afterwards you won't be over .05 no matter how drunk you are....

I thought it sounded like bullchit so I gave it ago on one of those pub BAC machines and it definitely works!! but its hard work drinking 2L in one go if you've already been on the juice!

ps it works on the machines the Vic police have got not sure about other states

there's not a lot of medical ground for that.

you see, alcohol travels in the blood. the way the body gets rid of it is:

- by metabolising it in the liver

- by excreting it in your urine, breath, sweat

so in theory, drinking 2L of water will cause you to urinate more and excrete more alcohol. in theory sweating a lot could also cause some alcohol to be excreted....

...but the reality is that the amount that you would lose is pretty insignificant and the main determinant of how your body gets rid of alcohol is the metabolic capacity of your liver.

BAC tests measure the amount of alcohol excreted in your breath (in your lungs, the blood travels very close to the air (<0.05um), exchanging many things with it). drinking 2L of water has NO direct masking effect on the way the test measures your BAC

cheers,

Warren

I think it would depend greatly on the disclaimer (which most of the ones I've seen have) just bear in mind that the accuracy of these machines is only as good as how recently it was checked for calibration.  The only really sure way of not getting caught is by not drinking.

Word. I think relying on a machine being maintained by someone else is pretty silly.

If you're a P plater you shouldn't be thinking about drinking and driving anyway. The person in this hypothetical situation was playing russian roulette and got nicked. It's their own fault.

- J.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...