Jump to content
SAU Community

Recommended Posts

It IS off topic, there's an article in latest HPI about beefing up an auto. you can trick the auto with an electronic shift kit which will make your auto runs like a manual. you then have to shift it out of drive, 3 , 2, 1 yourself. Better try grab the magazine and have a read, the article is quite informative.

Whats HPI ?

Thanks,

Mike

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

QUOTE (>GoDziLLa<)
I don't know if its true but someone told me that chasers used to be BMT but either went bankrupt or changed name now thier chasers

Nope, Chasers was race gear orginally, then BMT when bankrupt and Benny and a few mech's from BMT went to chasers and started a tuning division for them.

My Choice: Ice Performance or Racepace.

I've had great results from both.

My wife works just a few minutes walk from Racepace so its ideal for me to take my car there.

I haven't tried Chasers but I "heard" that their main Mechanic has returned to Japan hence the change from BMT to Chasers. true/false?

Quite a few of my friends have been to Amberley Autos with good feedback.

Farken Hell this thread has more dribble in it then the baby section of a hospital!

Since the title of this thread is Chasers Tuning I'd like to add my 2c. I've been a customer of Chasers for around 12 months and I have found all the staff, particularly Benny to be exceptionally knowledgable when it comes to Skylines.

Those of you that go to Chasers will know that the workshop is always open to 8-9pm at night while they are working hard on cars. The team at Chasers recently moved to Dynon road (the extension of Spencer Street) where they have teamed up with Paul the Motec Tuner which is an exciting partnership as these two know more about import cars then most of us could hope to learn in a lifetime. Benny from Chasers has seen this thread on the internet and spoke to me last night about it. He told me that if anyone has a problem with a tune, new turbo, front mount etc etc from his workshop then they will work hard to make sure you are happy which is a lot more than most workshops will do.

Having owned a handful of imports I have found Chasers to be a place that I can trust implacably.

Jevan

PS- DYNO GOING IN MONDAY!!!!

My Choice:  Ice Performance or Racepace.  

I've had great results from both.

My wife works just a few minutes walk from Racepace so its ideal for me to take my car there.

I haven't tried Chasers but I "heard" that their main Mechanic has returned to Japan hence the change from BMT to Chasers. true/false?

Quite a few of my friends have been to Amberley Autos with good feedback.

Kashima was walking around Autosalon, so that would be false.

Jevan,

Do you know if they have FC Logit in place?

....Since the title of this thread is Chasers Tuning I'd like to add my 2c.  I've been a customer of Chasers for around 12 months and I have found all the staff, particularly Benny to be exceptionally knowledgable when it comes to Skylines......The team at Chasers recently moved to Dynon road (the extension of Spencer Street) where they have teamed up with Paul the Motec Tuner which is an exciting partnership as these two know more about import cars then most of us could hope to learn in a lifetime....Having owned a handful of imports I have found Chasers to be a place that I can trust implacably.

Jevan

PS- DYNO GOING IN MONDAY!!!!

Farken Hell this thread has more dribble in it then the baby section of a hospital!

Since the title of this thread is Chasers Tuning I'd like to add my 2c. I've been a customer of Chasers for around 12 months and I have found all the staff, particularly Benny to be exceptionally knowledgable when it comes to Skylines.

Those of you that go to Chasers will know that the workshop is always open to 8-9pm at night while they are working hard on cars. The team at Chasers recently moved to Dynon road (the extension of Spencer Street) where they have teamed up with Paul the Motec Tuner which is an exciting partnership as these two know more about import cars then most of us could hope to learn in a lifetime. Benny from Chasers has seen this thread on the internet and spoke to me last night about it. He told me that if anyone has a problem with a tune, new turbo, front mount etc etc from his workshop then they will work hard to make sure you are happy which is a lot more than most workshops will do.

Having owned a handful of imports I have found Chasers to be a place that I can trust implacably.

Jevan

PS- DYNO GOING IN MONDAY!!!!

What's been the problem with any of the posts you've seen? rs73 asked for feedback from anyone has had their powerfc tuned at chasers. A few people posted their feedback and rs73 got what he was after, some feedback and experience. Why the big hoo haa about it?

i havent had any tuning done yet from chasers but my car has had the works done from them, and from my experience, benny is one of the most courteous and nicest mechanics i have ever dealt with, who always spends time with u and explains things properly and all, i know its not got nothing to do with tuning, but i tought i might add my lil share in. i know i will be definately going to benny to get a tune.

Hey, since i've had my car - 12 months - the car has had all its work done at chasers since day one. Benny, Brad and Scott have always been open to lending me a helping hand no matter how great or small the problem. The car is currently there undergoing an RB25 conversion, which has been dealt with very swiftly and much quicker than i expected. I haven't had a tune there though, so i guess i can't comment to your original post.

Everyone has their own opinion about their own workshops, so it impossible to get an unbiased opinion. Every workshop has the potential to produce excellent results, but every workshop also slips up once in a while and gets flamed forever.

Don't take any of our words for it, go out yourself and speak to the various workshops then make up your mind.

Paul Flourentzou from PMWi (www.pmwi.com.au) will be handling all of the tuning in-house from now on at Chasers, since we moved to the bigger workshop in West Melbourne, and aquired our own dyno...

Previously we had Protek handle the majority of PFC an SAFC tunes/dynos, power-runs, etc. Paul has not had anything to do with any of this work up until now, as our dyno only just became operational yesterday. Paul will be handling all of our tuning/dyno work from now on, as he already has a great reputation in the industry, and is an authorised dealer for Motec.

Hey, since i've had my car - 12 months - the car has had all its work done at chasers since day one.  Benny, Brad and Scott have always been open to lending me a helping hand no matter how great or small the problem.  The car is currently there undergoing an RB25 conversion, which has been dealt with very swiftly and much quicker than i expected.  I haven't had a tune there though, so i guess i can't comment to your original post.

Everyone has their own opinion about their own workshops, so it impossible to get an unbiased opinion.  Every workshop has the potential to produce excellent results, but every workshop also slips up once in a while and gets flamed forever.  

Don't take any of our words for it, go out yourself and speak to the various workshops then make up your mind.

:bs!:

Not all opinions are biased.

I have never taken my car to Ben @ Racepace and have only meet him once, but just from word of mouth, experience, and results I know he is good at what he does and therefore I will recommend him, were needed. Just like, if someone was looking for a mechanic on the west side I would recommend EAS Performance, for the same reasons. See, I will probably never get my tune at Racepace only due to the fact that I have a Wolf3D ecu and Ben would probably not know how to tune/use this ecu as well as my mechanic and Rank Rotary.

Sorry, a little off topic, but had to point out not all recommendations/referrals are biased. Most ppl are genuinely honest.

:bs!:  

Not all opinions are biased.  

I have never taken my car to Ben @ Racepace and have only meet him once, but just from word of mouth, experience, and results I know he is good at what he does and therefore I will recommend him, were needed.  Just like, if someone was looking for a mechanic on the west side I would recommend EAS Performance, for the same reasons.  See, I will probably never get my tune at Racepace only due to the fact that I have a Wolf3D ecu and Ben would probably not know how to tune/use this ecu as well as my mechanic and Rank Rotary.

Sorry, a little off topic, but had to point out not all recommendations/referrals are biased.  Most ppl are genuinely honest.

ok, not all opinions are biased, my bad.

But you see what i mean, there's alot of people out there who will generally flame/praise a workshop from what they hear from other people without having taken their cars there themselves.

Alot of stuff is hearsay, which gets exaggerated and made 10 times worse, or 10 times better.

^^^They served me rather well when another shop somehow messed up my engine bro, I caught the problems just in time and spoke with Benny, who did me a good quote. They finished my rebuild in a week and a half, and Benny was calling me at every stage of the rebuild with progress reports.

I don't see how I was being brainwashed or misled, they worked, I paid, I caned the thing to death around Sanddown and Calder's[circuit laps, no drags btw], and the engine never missed a beat. How's that for service?

i saw the chasers pink 180 get tuned at c&d motorworx in sunshine

so they took it to protek and then c&d....?

Might have been that their dyno wasnt online at the time, it would have been their car on the dyno, but Paul would have been the bloke in the car doing the tuning.

It's not about how much time you have, it's about how much dedication you have. Ice worked on my car till 5am on Sat morning and moved the car in at 8:30 in the morning.

And look at the results.

That is dedication...

i booked my car in for specific repairs/tunes for a monday morning at 8:00am in TWO weeks advance, after seeing some recomendations here on these forums.......

they did not turn up to work till 12:00 noon that day, and did not do the specific things i asked for and charged me premiuim dollars.....

then i went to another tuner and was looked after very well.

maybe i should invest in some shares?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...