Jump to content
SAU Community

As new in boxes: Multicolour gauges / Bleed Valve + Stock R34 GTT intercooler

Brazen
 Share

Recommended Posts

Brazen Experienced

Brazen

Posted
Posted

A few bits to offload quickly:

1. Multicolour backlit Oil Temp Gauge (7 colours to switch between) - never fitted

2. Multicolour backlit Boost Gauge - fitted for 3 weeks - now got HKS EVC 5 so not needed

Both as new in boxes, 2" inch, - can jam in side by side nicely into any Skyline/Stagea ashtray hole angling up and towards driver with no other fitting needed other than wiring up and jamming them in :( Or feel free to mount them any way u like.

Paid $65 for boost and $82 for oil temp - sell $45 boost (delivered) and $55 oil temp (delivered) or $90 for both together delivered.

16143TonkaGauges.jpg

3. GFB bleed valve - as new in box - fitted for 3 weeks - replaced by the HKS EVC 5 so not needed

$50 delivered

4. Stock R34 GTT Intercooler out of Series 2 Neo6 Stagea only dont 50,000kms. Good upgrade for R33 RB25DET with moderate mods - direct bolt-on but with 23% more airflow... see sydneykids application of one here http://www.skylinesaustralia.com/forums/sh...ead.php?t=69501

$175 delivered

Cheers ;)

Adam

Scotty Proficient

Scotty

Posted
Posted

I'll take the bleed valve. Thanks!

ps, I'm leaving overseas for 2 weeks as of tonight. I'll check this post by 10pm tonight, so if you can, please pm me your email address and bank details, and I'll direct debit it through.

If I dont hear from you by then, then could you hold if for me?

Thanks

Brazen Experienced

Brazen

Posted
  • Author
Posted
I'll take the bleed valve. Thanks!

ps, I'm leaving overseas for 2 weeks as of tonight. I'll check this post by 10pm tonight, so if you can, please pm me your email address and bank details, and I'll direct debit it through.

If I dont hear from you by then, then could you hold if for me?

Thanks

Sold... PM sent with details...

Intercooler sold

Bleedvalve sold

Gauges only things left up for grabs!

:cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...