Jump to content
SAU Community

Recommended Posts

I've got $650 on the diff, but a local guy is pretty keen and looking tomorrow.

Front bar is sold

I have the bonnet latch mechanism, but I think another local was interested. ask again in a few days.

Have I missed anybody's question..

If so, sorry can you ask it again.

Thanks all. The response has been awesome, If only you were all local I'd have sold everything!!!

Oh I do have both front guards but the RHS one is in need of a heap of repair but can be repaired. The LHS on has a dent in the top and is an easy repair. Pick up only on these, $200 and 3 days of panel beating for anyone thats up to it.

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

I have 4 really good door trims with the grey suede lining for $100 all 4, pickup only

Excellent carpet $50 pickup only

Intercooler $700 pick up only excellent condition. will throw every bit of 3 inch plubing

Still got both diffs and both tailshafts...

Still got gearbox and clutch $offers?

Have LHS indicator $75

All glass, both doors all electrics etc

Anyone want the complete attessa system (gearbox/clutch/front and rear diffs, both tailshafts, atessa pump 3 driveshafts (sold the FRS one) $2000 negotiable pick up only

Anyone want to start building a race car with the empty shell $offers

I may remove the rear quarter panels if someone wants to pay a decent price for them $offers

Hey, do you have the rear quarter window surround interior pannels?

Also, do you have the fuel pump?

I'm in adelaide, so i can come pick it up asap.

Cheers,

Nathan

Do you need both surrounds?

Fuel pump sold

Turbos and injectors available if anyones inteested $offers

hi mate, what's the drivers door glass like? if it's ok and the price is right I'll take it. I'm in sydney but have a mate in adelaide I can get to pick-up.

Sold the air vents, could have sold them 20 times over

no front pipes and the dumps are standard.

what gearbox surrond were you after?

I sold the leather boot bit but have the other stuff.

need to look at the glass tonight to see if theres any scratches and I'll get back. If its sweet, I'll be after $100

I think the rear handles are there, i'll check tonight

Sold the air vents, could have sold them 20 times over

no front pipes and the dumps are standard.

what gearbox surrond were you after?  

I sold the leather boot bit but have the other stuff.

need to look at the glass tonight to see if theres any scratches and I'll get back. If its sweet, I'll be after $100

I think the rear handles are there, i'll check tonight

Its a plastic bit that holds the leather part from coming out below is a pic

7799c40f87.jpg

Ive still got some really good stuff

mirrors $50 ea

window mechansims complete $100 ea

glass $100 each

rear steering rack $50

front rack $150

crossmembers $50 ea

power steer pump $50

gearbox with clutch and front driveshaft $950

Intercooler $650

tailshaft $150

power steer pump $50

ABS unit $200

Atessa pump $200

front diff $200

excellent carpet $50

excellent doors $130 ea

buyer to pick up or arrange freight if possible

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...