Jump to content
SAU Community

Recommended Posts

Hi Guys,

I have a friend who is building a project car. He needs two doors and a boot sandblasted so they can be sprayed later on. Have any of you guys done any of this before, if so how much did it cost for you? The doors have been stripped and don't have anything attached to them so theres no labour involved in pulling them apart or removing stuff from them. Just blast away!

Thanks

Link to comment
https://www.sau.com.au/forums/topic/73028-cost-for-sandblasting-doorsboot/
Share on other sites

you have to be so very careful with who you get to do the blasting as if they use a grit that is too harsh you will wish that you had nevr done it... it will not cost, much over here it would cost you no more than $100 but again go to smeone who can do a good job your local spraypainter should be able to recommend someone

dont do it if you are after a quality finish. It can stretch the metal and its next to impossible to get all the grit out from the seams and inner panels.

Its quick and cheap, but not the thing for a show car. If the car is a daily driver and you are on a budget it may be OK.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
    • I use FCC car launcher. It has an option for different backgrounds, so instead of turning the screen off you can swipe 'up' to a black screen with no background/icons. (mine has the time on it only). It's kinda nice. Also lets you use gestures to say swipe to go to next song, etc.  
×
×
  • Create New...