Jump to content
SAU Community

Part Number For R32 Gtst Ecu, Please Help *urgent* Car Wont Start!!

bretto

By bretto,
in Engines & Forced Induction

 Share

Recommended Posts

bretto Proficient

bretto

Posted
Posted

Hi ppls

Ive been putting my car back together for a while now. Now that it is together, the damn thing wont start, we put new spark plugs in it last night and it doesnt seem to be getting any fuel, fuel pump is working but the injectors dont seem to be working at all. I need to check that i have an r32 gtst computer and not some random the fella i bought the car off picked up at the wreckers. So if anyone can help with a part number that would be greatly appreciated.

The codes written on the side of the ecu are MEC-R212 B 1X22 Those are on the front on a nissan tag. Also on the side is MEC-R212 B 06645

We pulled the spark plugs out and after trying numourous times to start it they were dry and had no signs of any fuel getting to them, also when we were trying to start the car and feeling the injectors you couldnt feel them pulsing whereas my mates car was very noticable, thats why we are guessing its the injectors.

Thanks guys.....Brett

bretto Proficient

bretto

Posted
  • Author
Posted

yeah im pretty sure the lines are on the right way, we pulled the line off to make sure there was fuel being pumped through. wouldnt the injectors still be pulsing to try pump fuel into the engine even if there wasnt any fuel there? coz they definitely arnt doing anything.

blind_elk Grand Master

blind_elk

Posted
Posted

One of the green relays down behind the ECU controls power to the injectors. Make sure that both relays (the other is for the coils) are switching on when you set the key to "ON".

Trace the fuel line from the FPR back towards the the fuel tank. If you run into the fuel filter, then the fuel lines are on the wrong way round. But that shouldn't stop the injectors pulsing.

While you had the plugs out, did you check that you had spark?

I have on old ECU, but its from a GTS4. The Nissan P/N is 23710 04U60 (It has MEC-116 A 9810 just above the "Hitachi" on the label)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
    • MBS206
      Leaking Rear Subframe Bushing?

      By MBS206 · Posted

      Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • Duncan
      Leaking Rear Subframe Bushing?

      By Duncan · Posted

      You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...