Jump to content
SAU Community

Recommended Posts

Hey guys due to a massive change in plans, I have the following brand new items for sale. Boxes have only been opened to inspect the actual goods on arrival. Prices are FIRM, and please don’t whinge about I can get this for $$$ from here or there. These products are here and ready to go, no customs duties or gst. I am loosing money on these items, as they where bought in Australia.

  • Trust/Greddy V-SPL R32 RB20-DET Tube and Fin FMIC KIT WITH Piping, Clamps, etc..

$1550 Delivered Anywhere in Australia.

  • AP Engineering R32 RB20-DET Power-FC with Hand Controller

$1650 Delivered Anywhere in Australia.

As I said prices are firm. Both these items are in Western Australia, and will be sent to your door via AAE.

Cheers, Steve

Link to comment
https://www.sau.com.au/forums/topic/73189-r32-cooler-kit-and-powerfc/
Share on other sites

not trying to cut your grass here steve but you can get powerFC's brand spankers from a number of forums' sponsors for less than $1000 :(

Obviouslly you dont know much about the Rb20DET power FC's!

Apexi dont make a power FC for the RB20's and a company called "AP engineering"

Obviouslly AP engineering add on an extra $500ish for their troubles!

$1650 is a very good price for a RB20DET PFC, Good Luck with the sale masTers

From memory no, but ill have a flick through the instruction booklet when I get home.

I do know that there is no drilling required, as there is mounting points on the chassis that the cooler utilizes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...