Jump to content
SAU Community

Hks T51r Spl

OREX
 Share

Recommended Posts

OREX Collaborator

OREX

Posted
Posted

I have an "as new" HKS T51R SPL- not KAI.

It's the turbo, flange adaptor and custom dump pipe.

Bought off a dyno queen with less than 500km.

Rated over 800hp.

Perfect condition, all you need is a manifold and external gate.

Experts say to charge more than $4,000 cos a whole kit is worth more than 10k but I guess I'm open to offers.

Very rare turbo.

Call me on 0411 453 770 or pm me for more info.

Link to comment
https://www.sau.com.au/forums/topic/73201-hks-t51r-spl/
Share on other sites
IN5AN3 Apprentice

IN5AN3

Posted
Posted

Mate $4500.00. You have to be pulling yourself.

Greenline motorsports have these for $4200.00 BRAND NEW.

You cant say its brand new you told us it had been on the dyno before. Probably thrashed off its tits.

Where is the gold SPL stick on the front housing. For all i know it could be a KAI.

Im not having a go at you but many ppl including myself have been screwed over in the past and i believe that without adequate documention to prove its a SPL you have your self kidding.

Link to comment
https://www.sau.com.au/forums/topic/73201-hks-t51r-spl/#findComment-1349436
Share on other sites
  • 2 weeks later...
GT51R Experienced

GT51R

Posted
Posted

i had a HkS T51R-SPL kit with manifold, wastegate, and lines and it had only done 2000k's sold it for under $4k now you might understand why people are hesitant. You can get a new kit off the net for around $5k and a bit with all the stuff included. Is this an RB SPL or normal non ballbearing? Meaning is the wheel nut pink gold or blue? I'm interested for the right price, i sold my 'R' and couldn't help but come back again for more pain. pm me if wanna sell definately at reasonable price.

Link to comment
https://www.sau.com.au/forums/topic/73201-hks-t51r-spl/#findComment-1381458
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...