Jump to content
SAU Community

ATTN: owners of brant alarms

carlo

By carlo,
in New South Wales

 Share

Recommended Posts

carlo Veteran

carlo

Posted
Posted

Guys.

Just read this on another forum

http://www.search.asic.gov.au/cgi-bin/gns0...t=ACN&srchsrc=1

It appears brant has gone into administration, so you may not be able to get support on your alarm systems.

Sorry thats all the infomation I have.

p.s.. if this is a repost.. keep smart ass remarks to your self. :(

Link to comment
https://www.sau.com.au/forums/topic/73236-attn-owners-of-brant-alarms/
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted

plus plenty of support from insurers. I have heard some stuff cases where their systems were not quite all that. but I guess like all these alarms if you are trained in installing them, it's a piss of cake to disable them. and that's the problem so many people installing Brant alarms. sure they have security licences (or should) but that's no guarantee of their good character.

wrxhoon Grand Master

wrxhoon

Posted
Posted
plus plenty of support from insurers. I have heard some stuff cases where their systems were not quite all that. but I guess like all these alarms if you are trained in installing them, it's a piss of cake to disable them. and that's the problem so many people installing Brant alarms. sure they have security licences (or should) but that's no guarantee of their good character.

Thats the case with any alarm mate , if you know what you are doing you can start the car in seconds .

I have a 02 sti with the brant keypad ( a pain in the ass i might add ) . Every time the battery gets low you have to go back to Suabaru to get a master code put in and the good thing about it has to go on a tilt tray . People are paying for the tow track $80- 150 + 45-60 to the suby dealer just for 2 minutes work . They wont give you the master code for obvious reasons .

My battery went flat a few weeks ago and when it wouldnt accept the code i desided it was time to bypass it . It took me about 10 minutes to locate the unit and about 10 minutes to work out how to bypass it . Now that i know how its done i can do it in about 30 seconds , so much for the fantastic brant keypad system .

I may add that the sti has another brant unit in it that is controlled by the subaru key ( a little button on it ) and a third one that comes with the car from japan .

All very easy to bypass with a little know how .

carlo Veteran

carlo

Posted
  • Author
Posted

on the topic of easily bypassed, i would say most factory fitted alarms are easy to get around. They would all be installled the same and once a weakness if found the car is fair game. If I was buying a wrx I would not get it with an alarm and have a custom one installed.

dbloemhard Explorer

dbloemhard

Posted
Posted

I had a Brant in my Soarer - it was the most useless alarm i've used. Had to practically hold the transmitter on the car to lock it, yet on quite a few occasions i'd be walking away from my car (20-50m) and i'd hear my car unlock (no idea how that happened, but i had to walk back to the car to lock it!). Transmitter batteries lasted about 2 months because you had to hold the button down for about 3 seconds to lock/unlock it

No idea about how easy it was to bypass, but it just gave me the shits. Young and Cool insurance required it though. Alot of people i know had gone back several times for replacement modules...

  • 1 month later...
siddr20 Grand Master

siddr20

Posted
Posted

hmm dont know if this is a really old thread or not, coz i searched for this topic..

Anywyas in a months time im purchasin a 33gtst.. A friend has the Brant-nemesis alarm system on his skyline and says it works really well with postive feedback..

Now by reading all your replies, which brant alarm system have you got??

Also what did you mean Brant has gone into adminstration??

Which alarm system would you recommened if im hearing all these negative feedbacks..

1k is my budget for an alarm. so please suggest me some..

Cheers..

wrxhoon Grand Master

wrxhoon

Posted
Posted
hmm dont know if this is a really old thread or not, coz i searched for this topic..  

Anywyas in a months time im purchasin a 33gtst.. A friend has the Brant-nemesis alarm system on his skyline and says it works really well with postive feedback..  

Now by reading all your replies, which brant alarm system have you got??  

Also what did you mean Brant has gone into adminstration??  

Which alarm system would you recommened if im hearing all these negative feedbacks..  

1k is my budget for an alarm. so please suggest me some..  

Cheers..

For about $1200 -1300 you can get a tracker , why pay $1 k for an alarm ?

See group buys in this forum

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...