Jump to content
SAU Community

r33 gstst ignition coils

zoom

By zoom,
in Engines & Forced Induction

 Share

Recommended Posts

SLY33 Mentor

SLY33

Posted
Posted

i have just changed to splitfire coils, and it is still recommended to keep the plug gap to 0.7 or 0.8mm. On the street it ran fine at larger gaps (i tried up to 1mm) but on the dyno it missed badly up top of the rev range.

as a point of interest, with plug gaps at 0.7mm, i gained roughly 3rwkw on the same dyno in the same conditions since changing the coils to splitfire, nothing else changed. Its probably insignificant, as i didnt do numerous runs and take an average, but its nice to see :(

SLY33 Mentor

SLY33

Posted
Posted

oh, to answer your question, i would recommend it. Im only running 17psi, and the stock coils would give me a few misses every now and then, but with the new ones i havent seen a miss yet. It did also feel like it ran stronger after i changed the coils. May be Placebo effect tho!

Also if yours is an early series 1 33, the coils will be getting pretty old now.

oscar32 Mentor

oscar32

Posted
Posted

Yeah, mine missed like crazy once I got past 15 psi, but I found all the coils were cracked.

Splitfires are a good upgrade, and I saw an improvment of around 5 - 8 kws or so, and the power feels a lot more solid (and I can actually floor it now....)

SLY33 Mentor

SLY33

Posted
Posted

you can get them for ~$700 thru greenline or nengun or the like. Or if you want them ASAP Horsepower in a box should have them on the shelf and get to you in a couple days, but for around $900 maybe a bit more -not sure, check the website. High octane racing in NSW should have them also.

pretty sure price is same for series 1 or 2.

as far as i know, the splitfire series 1 and 2 coils are exactly the same coils, just the plug is slightly different, so its possible you could just use the correct loom/plugs with either coils on s1 or s2. correct me if im wrong.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
guys,

is it worthwhile to upgrade ignition coils to spitfire when running about 18psi or r33 gtst? any feed back would be appreciated!

not really.

My car is fine and im over the 300rwkw for the time being.

I have no issues at all.

MY suggestion, put it all together and then see if you have any problems.

THEN spend the extra $$$ on getting them. That way your not spending money if you dont neccasairly have to

And some food for thought...

Whether the splitfires are actually better... who knows.

Remember your replacing 10year old packs with brand new ones, so of course they are going to work better

zoom Community Regular

zoom

Posted
  • Author
Posted

Thanks mate, i will run with the stock coils first then, if they work, i dont have to get the spitfire! :P

not really.

My car is fine and im over the 300rwkw for the time being.

I have no issues at all.

MY suggestion, put it all together and then see if you have any problems.

THEN spend the extra $$$ on getting them. That way your not spending money if you dont neccasairly have to

And some food for thought...

Whether the splitfires are actually better... who knows.

Remember your replacing 10year old packs with brand new ones, so of course they are going to work better

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

:)

im of the belief that if money can be better spent elsewhere, then it should be... if not save that money incase something else breaks.

I dont mind talking from what ive found out of my own car which ive spent a lot of time/money on... some i wasted. And i'd hate to see others do the same

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...