Jump to content
SAU Community

Recommended Posts

I would also appreciate it if anyone can shed some light on krush's install above (the R32). I'm looking to do mine asap and want to make sure it's right.

Cheers to Mark by the way on the quick delivery - paid on Monday last week and received Thursday last week in Sydney.

  • Replies 1.8k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I installed 1 of these on my R32 GTST a few weeks back, works fine- set it to run 11psi. Can't see anything wrong with Krush's install there though?? The only difference in my install was that I had the controller plumbed in a lot closer to the actuator. Shouldn't make a difference though. I did find with mine that it has to be pretty much open to run 11 pounds. Best way to adjust it I found was to start with it fully open then fine tune it gradually. Takes a little while tho.

It is worth looking at though... I received it within about 3 working days. No spiking, holds the boost well and generally spools a lot faster. I'll post up a pic of my install in a few days time.

Paul

there was one for sale on the fore sale forum.

check it out. if its not there, dont whinge to me.

i got one posted today!! so it should be here soon. jsut to help me out guys (i admit im lazy) whats 11psi in bar?

there was one for sale on the fore sale forum.

check it out. if its not there, dont whinge to me.

i got one posted today!! so it should be here soon. jsut to help me out guys (i admit im lazy) whats 11psi in bar?

yeah I know there was one, no response ;)

11psi = approx 0.8 bar

Got mine installed. Seems to deliver the boost much smoother than my old turbosmart. Doesn;t feel as powerful though. Maybe my mechanic set it lower than I asked. By boost guage is f*ked apparently so might have to get a new one and see what its at.

yeah, well the theory was to hide it under the pod. "valve, constable? what valve?"

the tubing size is so small and the pressure relatively high, a few extra cm's of length won't make any diff (according to what i can remember from highschool physics) but might stop it getting noticed. i'm also planning all sorts of craziness under the bonnet so having the extra length there for now is a good thing. :P

Fitted mine in about 10 minutes too.

however on my car, boost doesn't seem to come in any earlier - previous owner hiflowed the turbo so I suppose it's still too large to have low-end power. :D I mean, I'm still increasing boost by redline in 3rd gear!

But it's good, at least I can control the max boost :D seems to spike a fair bit still though.

It's usually ok to run up to about 12psi @ the most.. i'd probably keep it at about 10psi depending on how old your turbo is and how likely you think it is going spit out the exhaust wheel..

Also depends on how you drive probably.. but 11psi should be fine

hey guys

i finally got mine... off ebay... took over a week and apparently the dudes gonna refund me, he even sent it express too.. took ages.

anyways before i got mine, i played with the old one and now sumthing is f**kd up... but the new one feels a lot better than the old one did! hopefully my turbo isnt dead, and i find out whats wrong.. then i can boost it up (and not break it!)

cheers

not so fancy... but works

did the installation with hijaked (dave) today

problem is his cars going through a rough time,

any i think we might of installed it wrong, we connected it to intercooler piping and wastegate etc etc , but is this correct ive sifted through the whole 26 pages and getting two answers one is that yes we did it right and the second is that people connect it to compressor housing, other than that alls well should be getting one soon for my mazda 626 turbo

soon just got to get the car first hopefully tuesday well cheers for any help guys

dave by the way we were twisting it wrong it goes in for more boost ; ) cheers

Edited by ultimategtr06

If anyone wants one for $35 delivered (which is what simark is selling them for) let me know. I'm going to be selling mine, it doesn't do anything for me because my wastegate is either ported or the actuator has been uprated :P I can't get anything less than 17psi in second gear - more in third :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
×
×
  • Create New...