Jump to content
SAU Community

New Brake Pads Fitted - Still making Noise

Babylon
 Share

Recommended Posts

QRI05E Mentor

QRI05E

Posted
Posted (edited)

I already made a thread about the same topic... my Bendix Ultimates work like a charm but ONLY my front driver side one Squeals under light/med braking... all 4 disc's were machined and fitted with Bendix Ultimates... Hard braking usually shuts it up for a few min till it gets cold again...

Any suggestions?

On another note... Babylon, was that you I ran on Cowpasture Rd a month or so back? :)

Cheers

Edited by QRI05E
  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Babylon Grand Master

Babylon

Posted
  • Author
Posted
I already made a thread about the same topic... my Bendix Ultimates work like a charm but ONLY my front driver side one Squeals under light/med braking... all 4 disc's were machined and fitted with Bendix Ultimates... Hard braking usually shuts it up for a few min till it gets cold again...

Any suggestions?

On another note... Babylon, was that you I ran on Cowpasture Rd a month or so back? :whistling:

Cheers

All I can say is each case is different, take it to someone who knows about skylines to look at the issue.

A lot of people looked at my car "so called brake specialists" told me I need 4 new discs I didn’t like the sound of that so I took it to bel and the only problem was that I didn’t have shim pads. Had nothing to do with the discs, pads, or the calipers.

I haven’t been down cowpasture rd for over 3 months only have been using it the last 3 weeks watching the world cup at marconi. And I don’t run other skylines lol RESPECT. So chances are it wasn’t me.

Murray_Calavera Mentor

Murray_Calavera

Posted
Posted

I have been having the same problem with squeeling at low speed braking.

I have new RDA slotted roters front and back.

And EBC green stuff on the front with bendix ultimates on the back.

I think the squeeling is due to dust build up?

I only get squeeling on the front, and thats where all the dust is. The ultimates dont squeel or make dust.

VHR32 Community Regular

VHR32

Posted
Posted (edited)

Why doesn't someone try a set of genuine Toyota 100 series Land cruiser pads?? They seem to last well on a 2500kg 4WD and pull up from cold and dont squeel like some pads, but i'm not sure how they will go on a 1500kg Skyline...

As I work for a Toyota dealer, I hear very good reports about them. I have just bought some for my car to try as see what they're like for a performance street pad.

They fit in a Skyline caliper and have a bit more pad area.

Part numbers are:

04465-60220 1/1998-8/2002 Has silver metal bits in them

04465-60230 8/2002-> Has more copper coloured metal in them

RRP $93.50 incl GST

I personally went for 04465-60220 and will keep you posted how they go!

Edited by VHR32
Babylon Grand Master

Babylon

Posted
  • Author
Posted
I have been having the same problem with squeeling at low speed braking.

I have new RDA slotted roters front and back.

And EBC green stuff on the front with bendix ultimates on the back.

I think the squeeling is due to dust build up?

I only get squeeling on the front, and thats where all the dust is. The ultimates dont squeel or make dust.

Go back a page and check out what SydneyKid suggested if that fails, Then take the car to someone who knows about skylines.

P.S dont make the same mistake i did make sure you have Shim pads. lol

Murray_Calavera Mentor

Murray_Calavera

Posted
Posted
Go back a page and check out what SydneyKid suggested if that fails, Then take the car to someone who knows about skylines.

P.S dont make the same mistake i did make sure you have Shim pads. lol

... looks like I needed to be told twice before it sunk in, thanks babylon :)

Direct quote from EBC

SHIMS - WHEN DO I NEED THEM?

Many semi metallic pads (those containing steel fibre) come fitted from the factory or aftermarket suppliers with rubberised metal shims on the back to prevent rattling and squealing. This is because of the type of material they use. At EBC we very rarely use shims because in 99 cases out of 100 we do not get noise, due to the non metallic nature of our pads. In certain cases however and in certain types of use, especially “under-use” shims may be necessary to quieten a pad. These can be obtained from EBC free of charge by simply calling 818 362 5467 and stating the type of vehicle. These will be sent out to you and again reminding you that the installation costs are for the customers account, we do not warranty this fitment charge or consider it part of our guarantee.

So either I need to thrash my car more regularly, or I should get a set of shims.

Blitz_boy Mentor

Blitz_boy

Posted
Posted

I put the Bendix General CT in my R34. They are the lowest Bendix model that are suggested for passenger vehicles. They don't make a noice and have excellent cold responce. But boy do they fade!

I will be swapping them to Endless SSY soon.

  • 3 months later...
R33-Lovr Enthusiast

R33-Lovr

Posted
Posted

hi guys, i have the same problem my brakes squeal like a woman in labour,

this is what i've changed since they starting to squeal

new rotors RDA

4 different brake pads,

bendix ultimate

bendix HD

fredos formula i think 2000 or something liek that

and then i went for Genuine, which stop squealing for a week, then i starting giving it a hard time for like one day, since then it started squealing again like a pig, i do have the shims on, i've cleaned everything like 3 or 4 times, i dont know what to do....

i have a worn castor rod bushes on the rears, could that be it...?

all this was done at a brake specialist, and he is even out of options,

can the shims be damaged or worn after use for a while, there is no obvious damage tho...

any help is appeciated

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      Here's a boring history lesson on number plates People want illegal spacing to make their plate more readable, if mine was J2X BK, anyone who knows about the car would see that its spelling JZX. Years ago third party plate manufacturers could alter the text to make it look like something else, nowadays the computer software is locks that ability (well, ours does at work) Up until 2001 the first letter of a number plate represented the year of the vehicle, for example A would be 1983. (pre 1983, the format was backwards, so the year letter was on the end). Followed by 3 random numbers and 3 random letters. Things started to get complicated at the end of the 90s where T and V were 1999, W and X were 2000 and Y was early 2001. From 2001 they introduced a new 'layout' where the first two characters are letters, this represented where that vehicle was first registered in the country. The letters corrosponded to a region in the country. Some regions had a large number of codes, where as some only had a couple (despite being large in physical land size) Next are 2 numbers to indicate 2000s. So it went from: Y (March 1999 > Aug 2000) 51 (Sept 2001 > Feb 2002) 02 (March 2002 > Aug 2002) 52 (Sept 2002 > Feb 2003) etc etc When the 2010s got here, the numbers changed again, going up by tens 10 (March 2010 > Aug 2010) 60 (Sept 2010 > Feb 2011) When the 2020s arrived it went to 20 (March 2020 > Aug 2020) 70 (Sept 2020 > Feb 2021) etc As for personalised plates, you're not allowed a registration that makes the vehicle look newer. Take my 110 for example, its a 2004 car so I can have any available plate upto 04. I can't have a 54 because it was manufactured in August 2004. Which allows me to have a J plate, because its older (if that makes sense)    
    • niZmO_Man
      iPad gauge cluster

      By niZmO_Man · Posted

      Mount some of these on your dash? https://www.greddy.com/products/16001720  
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
×
×
  • Create New...