Jump to content
SAU Community

Recommended Posts

  • Replies 172
  • Created
  • Last Reply

Top Posters In This Topic

LOL...not really:)  If it came out of nowhere my confidence would be shot to sh1t, but ill take pools of water and river across the track whilst on worn semi slicks a little more seriously next time:)

Only a reference to sump baffle syndrome. Only place in the country it seems to happen is turn 1 at the creek right.

Wont be able to make this one. Already have expensive plans lined up for that weekend.

For those who are first timing, take it easy first session; then get someone (instructor) to show you how its done. You will learn a lot.

If you come off, you will be fine, so long as you dont hit a wall.

andrew ur car is still at ICE, i spoke to Gereld when i dropped my car down and he said urs wont be ready till a couple of weeks

if my new twin plate clutch is here i'll come, but ive lost my licence can i still run?

No road license needed to race on the track, just a CAMS license :(

Get someone else to drive you there, jump in your car and go for it :D

My car better be ready or else I know of a certain Orange Supra that will have a 2nd driver on Sunday!

But yeah - as mentioned you can still do track without a license. Hell - you can do track if you are 14! So yeah as long as someone can get your car there you can still participate on the day.

If I only had a CAMS license! :D

I'm going to be down there for the weekend. Where abouts is Sandown???

Snowie might be able to fix you up, but entries may have closed and you'd have to join SAU Vic.
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...