Jump to content
SAU Community

prob with my car ( any 1 can help )

WAR33
 Share

Recommended Posts

WAR33 Apprentice

WAR33

Posted
Posted

hey i have got a R33 and wenever i go to slow down or go up my drive way , go to park it , or put it in reverse sometimes the revs will drop and it will some times stall or go really low and then kick its self back up ... i have cleaned out the idol speed motor and it still does it could it be a vacum leek or piping to the turbo not conectted prop if any 1 has any ideas and can help thanks heaps

Link to comment
https://www.sau.com.au/forums/topic/74579-prob-with-my-car-any-1-can-help/
Share on other sites
benm Grand Master

benm

Posted
Posted
Yup have a good read of that thread, I had the same problem. In the end what solved it for me was cutting the wire that goes from the fuel pump back to the ecu (tells it when to stop pumping). Never once had an issue after that :thumbsup:
SRG33 Enthusiast

SRG33

Posted
Posted

I had this exact problem! It turned out it that when the car was getting serviced, my mechanic noticed that there was a vacuum leak near the idle speed motor.. He fixed this and reset the timing, and i havent had any problems with idling/stalling since.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Returning after a long time!

      By silviaz · Posted

      Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      I'm not 100% how the BMW racers do it, but I know from other brands like Merc, moving, and changing the coolers is one of the things. Like getting a transcooler out from infront of the radiator to out near a wheel arch. So some of the stuff you've got crammed in the middle front, spread it out and open up where you can in the bar to get more air in to the sides.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • GTSBoy
      GTX2867R GEN 2 NO OUTPUT FOR BOOST SOLENOID

      By GTSBoy · Posted

      Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
×
×
  • Create New...