Jump to content
SAU Community

i got defected! =[

henzie

By henzie,
in New South Wales

 Share

Recommended Posts

shonen Grand Master

shonen

Posted
Posted

what about Evos that come with fmic standard ????

cause more injuries ???? what about the massive bullbars hanging off 4WDs ????

im pretty sure they would do A LOT more damage then a fmic will in the event of an accident.....but oh well what can we do hey ??

good luck getting them cleared...

ECR033 Mentor

ECR033

Posted
Posted
Next time give em a run 4 ur money we need more police chases.I have escaped twice. Floor it & turn corners!

That has got to be one of the most stupid posts I've ever read.

Do us all a favour and sell your Skyline before you kill someone.

Seriously...it's people like you who give the rest of us a bad name.

R2HKS Explorer

R2HKS

Posted
Posted
Are all BOV illegal ? i didnt know they were illegal

Venting to atmosphere BOV's are considered illegal because of the increased noise they make. Thats what the RTA inspector said. However if you have a plumback BOV these are theoretically not illegal because they are not noisy. So no not all BOV's are illegal.

Same goes for pod filters, these are deemed illegal also because of the increase noise they make from induction roar.

Front mount intercoolers, well thats just bull, unless they protrude outwards from the front bar, so if they are sticking out past the front bar they would be deemed illegal. Just like rocket launcher rod holders or extra lights on a 4wd bullbar cannot now stick out past the bullbar.

Fog lights on during daylight hours is a gay rule. How many cars do you know of like Volvo's have lights on, from the factory during the day as this is deemed safer so why these are illegal I don't know other than to raise more revenue.

My advice would be to cop it sweet from the cops then debate the issue later, even go to an engineer to get your mods approved and keep the engineer report in the car, then stick it in the cops face "without" saying anymore.

Ride height is a min of 100mm. Its must be able to pass over a 100mm object from front to rear under the car otherwise its deemed illegal so yes you have to be able to drive your car over that object without touching.

Hope this helps

Cheers

Moanie Grand Master

Moanie

Posted
Posted
Front mount intercoolers, well thats just bull, unless they protrude outwards from the front bar, so if they are sticking out past the front bar they would be deemed illegal. Just like rocket launcher rod holders or extra lights on a 4wd bullbar cannot now stick out past the bullbar.

ok.. just saw R2HKS' post! oops!

about the fmic.. i was defect for mine.. the reasons are for what R2HKS has said, plus because it can change your emissions levels.... i was told to pass an emissions test to keep fmic....

lwells Grand Master

lwells

Posted
Posted
what happen to freedom of speech if u wannna lay down n die then do so ,me im gonna fly .Old tmer can u remember y u bought a skyline?

Good thing there is no protection for free speech in Australia (except parliamentary privledge, but I'm guessing that probably doesn't apply to you).

LW.

R2HKS Explorer

R2HKS

Posted
Posted
There is no freedom of speech on this board. And many others. If the mods don'y like what you said they'll delete it. I am surprised Nick hasn't yet.

Yeah I'm starting to realise this now. I'm new here this is only the second thread I have posted in and the 1st thread I posted in Bel Performance vs Croydon's Racing Development in the NSW forum has now been deleted. That's just weak, apol's for the

Cheers

Mintie Collaborator

Mintie

Posted
Posted

comon guys give the guy a break...if you dont live in sydney west(near liverpool or fairfield area) you wont know....there is cops everywhere they are now out in force and r defecting anything and everthing that they dont like anything that is not standard even tho the mod is to rta standard you will need engineer certi.......i know this have happen ever since..some other f**ker car ass f***....... it up for all of us...now the cop are upset and are on to everyone else...

i also got defect for non standard FMI, non standard exhaust, non standard pod filter...even tho i have my pod filter box up, my exhaust is very soft.. since then i got my car engineer and my axhaust turn out to be only 77db!!!!!!!!!..i was been nice and respectfull to the officer during the time of defect........

well last friday i drive from fairfield to liverpool KK in my camry....i saw 8 cop cars in less then 15 mins!!!...dam...... so everyone just take care... pls try to avoid the area the on friday, sat nite..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...