Jump to content
SAU Community

Recommended Posts

Underneath the dash just on top of the clutch there is a bracket that holds the clutch. When i push the clutch in you can actually see it moving is this a big problem? Can somebody plz look and see if there bracket moves or is mine screwed? And whats that bracket called, i need to source a new one and is it hard to change do i need to remove the whole dash? Im told beacuase I have a heavy duty clutch thats why it came loose to much stress. And would anybody have an average price on what its worth.

Same here. I have a heavy twin plate and it ended up mangling the bracket so far the clutch pedal sat on the fire wall and I had to pull it up with my foot first to press the clutch in.

Apparently a common prob with heavy pedal effort clutches.

Not sure with your car but with the HR31 its made from thin metal with just a few spot welds here and there. Got another one out of a Pintara and it was welded up properley with extra plate steel reinforcement. I would just get one in good nick from a wrecker and reinforce it as it will only happen again.

The dash didnt "have" to come out but it was of those " get out you f@cking little c@nt of a thing" type of jobs.

It's a common occurance, I have broken the one in the R32GTST race car. It has an OS Giken twin plate in it, so not excessively heavy. Broke through the spot welds. The first sign was long pedal, needed to be depressed further to declutch. It just got slowly worse until no clutch.

Not only is it hard to get out, it is efen uncomfortable lying upside down, with the steering wheel in your crutch, the seat base in your crack, your feet on the head rest and your head under the brake pedal. Talk about rush of blood to the brain.....:headspin:

yer mine snapped as i pulled into work....luckily.

Looking back i replaced the clutch master cylinder, and the pedal was squeeking inside the car. Thought nothing of it. Clutch then seemed to play up now and then in car parks, thought nothing of it. Then i remember some clunky gearchanges, thought it was the gb cos it needs bearings.

Then as i pulled into work, i heard a small pop. Then 2 seconds later, it popped again and the clutch went to the floor. :D

Now i got a new clutch pedal box sitting here ready to go in. I was going to make a new pedal box out of some thicker 3 or 5mm steel, but ill just reinforce the new pedal box with steel around the 4 spot welds that hold it together !!!

No. Two bolts in engine bay on Clutch master cylinder. Then one looking straight up from the clutch pedal. You need a pillow or something on to lie on, then look up where the clutch pedal is..........SK described it exactly :

Not only is it hard to get out, it is even uncomfortable lying upside down, with the steering wheel in your crutch, the seat base in your crack, your feet on the head rest and your head under the brake pedal. Talk about rush of blood to the brain.....

I'll tell you as well what makes the whole process a heap easier ...

If you don't use the air vent near the drivers door much, just rip out the tube underneath the steering rack (or maybe it goes over, I can't remember as I pulled it out so long ago).

It makes the whole procedure so much easier as you can get to the nut on the pedal box with a socket and an extension :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...