Jump to content
SAU Community

Recommended Posts

i have recently written-off my R34 GTT after owning it for only 6mths. It wasnt insured either so I am gathering as much cash as possible to compensate for the loss. The rear to middle section of the car is damaged, so most parts from the front are all salvaged. If theres any parts u need jus PM me for details and il drop u sum pics. I have most bolt on parts such as an intercooler kit, aftermarket airfilter, T04 turbo, also GReddy gauges, boostcontroller, turbo timer etc

cheers

Link to comment
https://www.sau.com.au/forums/topic/74849-wrecked-r34-gtt-all-parts-forsale/
Share on other sites

location would be helpfull

And maybe if you list some prices for some easy sales like engine/box, Mods, rims, lights, etc.

Good luck man, I'm going through the same thing (stacked the front of my r32 a while ago), i got a engine, some interior, rear panels, and all the glass left. The rest is gone.

P.S. organise some prices to see what you can aim to get back from it. it helps

OK.....first question was it a manual ??

if yes......then ill DEFINETLY buy the power steering pump off you.

PM me and ill negotiate a price with you....mine is currently leaking....had it reconditioned TWICE.

Also If you had xenon lights ill buy them too....depends how much you want for it of course :rolleyes:

was the T04 turbo a bolt in replacement ????

I am interested intercooler and turbo and boost controller.

Also want to sell me your seats and steering wheel?

What boost can the turbo run, and will it bolt onto the RB25det standard flange?

custom dump and frontpipe?

PM me the details.

Thanks

If u r genuinely interestd pls take the time to pm me, caus i realy dont want to be goin back and forth with ppl tat D!@# around on this thread (ie "do u hav this? do u hav that?") the thread gets flooded and nothing eventuates. il pm u prices and details of the part or if the part is sold. And if u wan pics jus pm me ur email.

Replys listed have been pm'd or emailed

thanks

Sold - most interior incl. all electronic aftermarket accessories, seats, dash/ damaged bodyshell/ turbo/ bonnet/ driver glass window

Still have front exterior parts - headlights $750 delivered/ Mirrors $180 delivered/ frontbumper without blinkers $150 delivered/ all indicators $15 each deliverd/ 2mths old intercooler kit $900 deliverd/ basic engine mods BOV $160 delivered, airfilter $60 deliverd, might separate engine parts depending, jus let me kno which part.

............Pls Pm me thanks................

how much would you want to chop the front off (if manual) n sell it to me as a front cut basicaly.. all panels and all other shit can be taken off basicaly.. i need engine, gearbox, wiring harness, computer, n the usual shit so i can drop her in my sil to replace the dead rb20 :D

Warrick

email me at [email protected] or pm me either way

i have recently written-off my R34 GTT after owning it for only 6mths. It wasnt insured either so I am gathering as much cash as possible to compensate for the loss. The rear to middle section of the car is damaged, so most parts from the front are all salvaged. If theres any parts u need jus PM me for details and il drop u sum pics. I have most bolt on parts such as an intercooler kit, aftermarket airfilter, T04 turbo, also GReddy gauges, boostcontroller, turbo timer etc

cheers

hey mate, do you still have the standard boost gauge for sale?

If not how much you looking for the GReddy boost gauge? (are they 52mm?)

and how much for the boost controller? (what type is it)

where abouts are you located?

THANKS :D

Sold - all interior sold/ damaged bodyshell/ turbo/ bonnet/ driver glass window

Available-

headlights $750 delivered

Mirrors $180 delivered

frontbumper without blinkers $150 delivered

all indicators $15 each deliverd

2mths old intercooler kit (600x300x100)- as new $900 deliverd

BOV $160 delivered

airfilter $60 deliverd

might separate engine parts depending, jus let me kno which part.

All parts negotiable

............Pls Pm me thanks................

Pics also available to email addresses provided

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...