Jump to content
SAU Community

Recommended Posts

Hey guy's and girls

Having a few probs with my ride and was wondering if any of you had some advice. I’m having a problem with my engine but i can’t seam to find the cause of it. If i drive the car for a bout 15 min she's fine or if I take it out on a cold night I can drive her for hours with not problems at all. but if I drive it during the day for any more than about 15min the idle of the rpms drop and it sound's like two cylinders have bummed out, the tone of the exhaust changes and the engine losses all its power. At first I thought it may have been something simple like spark plugs or fuel filter so I had them replaced with no success. I thought the engine might have been running rich, but if so when I pulled the old spark plugs out they shout have been black but they weren’t really black at all and still looked new. I want to take it some were to be looked at but don’t know who to trust. Evo look like the dodgiest guy's I’ve ever met and wouldn’t trust em as far as I could throw em, and fast and the furious don’t look that reputable ether. I live in narabahnda so if anyone knows what the prob is or can direct me to someone that could help would be much appreciated

Thanks

Link to comment
https://www.sau.com.au/forums/topic/75248-can-some-one-help/
Share on other sites

hey it might be vac hoses loose, intercooler pipes loose, 02 sensor, coil packs over heating, check out the where to get car serviced thread and i am sure you will find someone in there that can help, i would personal recommend Trojan and Integra

Have you checked the Ignitor.......a few have had probs so now it's just a running comment/joke.

;) On my GTS_T it was the ignitor at fault.

It affects the spark deliverd if faulty, particularly when warmed up.

Sounds similar but as pointed out it can be a multitude of things. Start with the least expensive remedy. Spray the AFM with some Carby Cleaner, Swap your ignitor with a known working one and try it out. Coils ? Same with most things use the process of elimination.

or see ED

yeah was me at wakefield,

AFM is your Air Flow Meter, your pod filter should bolt onto it, sometimes the "wet" type pod filters can cause the hot wire in the AFM to get dirty, which can affect the fuel, i doubt thats your problem, but its something to check anyway

well im still having probs at least i know its not the AFR, the coil packs, the ignitor, the plugs or the fuel filter. so some one at just jap said to try the cam angle sensor, so the cars booked in agen this week at integra. Ed said he wouldent chage me if i was still having problems after changing the igntor. but i did notice integra dont seam to have an ECU diagnostic machine? thought that was a bit weard

but i did notice integra dont seam to have an ECU diagnostic machine? thought that was a bit weard

They do, but as per 99.9% of other workshops in Australia, they dont work on JDM models. Most workshops buy ones that can diagnose locally manufactured cars (e.g. Commodores and Falcons), and theyre tailored to cars which were sold in Australia... the skyline is a JDM import :D

I do know that Ed was looking at a new one that I think could do JDM cars, otherwise swing past Nissan and ask them to plug in the Consult and take the results to Ed :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And make sure the belts are tightened appropriately too.
    • They care about emissions, and cost the most. Save weight where possible, and make manufacturing easier. Less material also let's the engine transfer heat to water quicker, and bring the engine up to temp quicker, better for emissions and getting them past their warranty period.
    • I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
    • Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
×
×
  • Create New...