Jump to content
SAU Community

Recommended Posts

PRICE DROP NOW with ADAPTER $100...

PRICE

BOV with universal Adaptor is $100 if I dont have the pay customs. If so , then add 20% ($20) + 15 postage... I will be getting these guys flown over takes under a week to get to my place :(

DETAILS

I have finally added it to my car and it sounds great :) .. It sound just like the wav files a few replies down.. ON low boost it flutters a little but 5 pound+ its loud and furious...

There is a screw in the back which adjusts the blow off rate. I found adjusting the screw all the way in gave it a really tight sound, all the way out was a loose sound. (psh compared to ppsssshhh) just like the wav file below..

SPECS

The BOV is made from billet polished aluminum.

The HKS Super Sequential Blowoff Valve (SSQV) is a dual stage pull type relief valve. Unlike other blow off valves that are push type, the SSQV will not leak under high boost conditions nor under vacuum at idle. Being of a pull type valve structure, the SSQV can not physically leak under any level of boost because boost pressure also keeps the valve closed against its seat. The SSQV is actuated by pressure alterations only, not by the rate of pressure or vacuum in the line, which ensures a quick valve response and complete closure during idle. On typical blow-off valve designs, a large valve is utilized in order to accommodate high boost / high horsepower applications. However, these large valves tend to react slowly and require high activation pressure to open, therefore are not able to activate and prevent compressor surge at light-load conditions.

PEOPLE WHO WANT THE BOV

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

SHIP DATE

As early as possible. I'm aiming at 2 weeks before I ship or 10 takers which ever comes first.

PICTURES

I will add some picture of it in my car... Not that I want to because it is the first time I have welded in 6 years. you will see why..

Link to comment
https://www.sau.com.au/forums/topic/75282-hks-style-bov/
Share on other sites

$50 for postage?! That's abit extreme isn't it? Well, how do these imitations compare with the real HKS ones?

LOL exactly right man.... there is a dodgey prick on EBAY selling fake HKS SSQ for prices cheap as chips... monza bovs made to look like hks.... sorry but lots of people are weary now..

id buy one but only if i could inspect in person as ive had HORRIBLE luck with this... see my previous threads about ebay and hks ssq...................

if its genuine, you should have no trouble selling them to people so try buy them imo and sell for a profit of 200 to friends :(

Link to comment
https://www.sau.com.au/forums/topic/75282-hks-style-bov/#findComment-1381687
Share on other sites

I just read some of it. We will see after I install it on my R33 and see how we go from there. If sounds like I think it does I will be very happy and the GB will prevail. Otherwise I will cancel it. But for the now the sample I have looks really nice and everything seems in working order. :(

Link to comment
https://www.sau.com.au/forums/topic/75282-hks-style-bov/#findComment-1381768
Share on other sites

i got one of these BOV. They are good! I had no probs with them.

You dont need adapter..just need hose & the flange so u can place the BOV on top.

I was actually selling one here in SAU before but no one wants it, although offers are made & but buyer fell though so i sold it in ebay with ease :uh-huh:

Heres what it looks like installed in my engine.

http://www.geocities.com/j_aaron71/closerbov.jpeg

Linky to the sale i made.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...AMESO%3AIT&rd=1

Link to comment
https://www.sau.com.au/forums/topic/75282-hks-style-bov/#findComment-1395442
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...