Jump to content
SAU Community

Recommended Posts

Even when I find a box it's all the little things you need that make this difficult.

Not having been through this with a Skyline before I can only guess what is required.

My list so far if anyone cares to comment.

Gearbox/ bellhousing bolts/ g/b crossmember/ mount/ brackets?/ coverplate?/ clutchfork/ release bearing/ nuts and bolts etc.

Flywheel/ flywheel bolts/ spigot bearing/ pressureplate and bolts/ clutchplate/ slave cyl. and bolts/hyd. lines/ master cyl./ pedalbox with nuts and bolts.

Gearstick boot and surround/ gearknob/ instrument cluster surround.

Speedo cable/ loom for reverse light switch, inhibitor switch bypass, gearstick position sensors.

Manual ECU

Tailshaft

Starter motor?

Anything else I've overlooked or maybe something I've listed is unnecessary.

Anyway let me know if you have any of these bits for sale.

Thankyou.

i have the parts i have listed here in toowoomba about 1 hr from brissy like i say $200 cash for everything i have here....

Considering the need for every nut and bolt I think my best bet is a half cut.

I'm keeping your parts in mind in case someone offers me a package minus the bits you have.

I don't want to rush out and buy all the main bits and then find I still need dozens of small bits of little value that noone could be bothered looking for.

some one posted that they got quoted 2k to do a full manual conversion on a r33, if you know much about r33 the boxes arent cheap, so thats really really good price, i wouold sugest going and finding that thread (it was only a few days ago) and i tihnk it was in brissy to. For 2k fully converted, using the stronger rb25 box, id go for it

  • 2 weeks later...

If you can buy all the bigger items, all the smaller nuts and bolts should be able to be bought from Nissan. Expect to pay around $1200 for a complete kit with most nuts and bolts.

P.S you need to add a manual dash instrument cluster to your list of goodies

you're going to be bumping forever as you're not going to find a complete set anytime soon.. its easier / cheaper to pick up the individual parts as I have had to do.. whats a few bolts anyhow?

  • 1 month later...

Ok, I've got an R33 g/box coming.

I need R33 slave cylinder and R32 gtr speedo drive in addition to most of the parts listed in post #3.

I no longer require driveshaft, starter motor, ecu, gearknob or speedo cable.

Let me know what you've got.

  • 2 weeks later...

I have an R33 GTS25t 5 speed complete. Came out of a car with just 80000k on it it and it's yours for $1100.00. I can also supply an RB20DET box from a R32 GTSt for $400.00.

I have a billet STEEL flywheel and VL Turbo clutch plate all brand new.

Contact me by PM or [email protected]

IF your still interested.

Cheers,

Dennis

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...