Jump to content
SAU Community

R32 GTSt manual conversion

B0oStEr

By B0oStEr,
in Wanted to Buy

 Share

Recommended Posts

B0oStEr Mentor

B0oStEr

Posted
  • Author
Posted

Even when I find a box it's all the little things you need that make this difficult.

Not having been through this with a Skyline before I can only guess what is required.

My list so far if anyone cares to comment.

Gearbox/ bellhousing bolts/ g/b crossmember/ mount/ brackets?/ coverplate?/ clutchfork/ release bearing/ nuts and bolts etc.

Flywheel/ flywheel bolts/ spigot bearing/ pressureplate and bolts/ clutchplate/ slave cyl. and bolts/hyd. lines/ master cyl./ pedalbox with nuts and bolts.

Gearstick boot and surround/ gearknob/ instrument cluster surround.

Speedo cable/ loom for reverse light switch, inhibitor switch bypass, gearstick position sensors.

Manual ECU

Tailshaft

Starter motor?

Anything else I've overlooked or maybe something I've listed is unnecessary.

Anyway let me know if you have any of these bits for sale.

Thankyou.

B0oStEr Mentor

B0oStEr

Posted
  • Author
Posted
i have the parts i have listed here in toowoomba about 1 hr from brissy like i say $200 cash for everything i have here....

Considering the need for every nut and bolt I think my best bet is a half cut.

I'm keeping your parts in mind in case someone offers me a package minus the bits you have.

I don't want to rush out and buy all the main bits and then find I still need dozens of small bits of little value that noone could be bothered looking for.

geordie Proficient

geordie

Posted
Posted

some one posted that they got quoted 2k to do a full manual conversion on a r33, if you know much about r33 the boxes arent cheap, so thats really really good price, i wouold sugest going and finding that thread (it was only a few days ago) and i tihnk it was in brissy to. For 2k fully converted, using the stronger rb25 box, id go for it

  • 2 weeks later...
boj01 Experienced

boj01

Posted
Posted

If you can buy all the bigger items, all the smaller nuts and bolts should be able to be bought from Nissan. Expect to pay around $1200 for a complete kit with most nuts and bolts.

P.S you need to add a manual dash instrument cluster to your list of goodies

predator Grand Master

predator

Posted
Posted

you're going to be bumping forever as you're not going to find a complete set anytime soon.. its easier / cheaper to pick up the individual parts as I have had to do.. whats a few bolts anyhow?

  • 1 month later...
B0oStEr Mentor

B0oStEr

Posted
  • Author
Posted

Ok, I've got an R33 g/box coming.

I need R33 slave cylinder and R32 gtr speedo drive in addition to most of the parts listed in post #3.

I no longer require driveshaft, starter motor, ecu, gearknob or speedo cable.

Let me know what you've got.

  • 2 weeks later...
Ghostrider Grand Master

Ghostrider

Posted
Posted

I have an R33 GTS25t 5 speed complete. Came out of a car with just 80000k on it it and it's yours for $1100.00. I can also supply an RB20DET box from a R32 GTSt for $400.00.

I have a billet STEEL flywheel and VL Turbo clutch plate all brand new.

Contact me by PM or [email protected]

IF your still interested.

Cheers,

Dennis

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...