Jump to content
SAU Community

Recommended Posts

Okay before I start my story please let me say in no way am I either excepting responsibility nor am I blaming the second party. (I am blaming the third)

Recently I had some wheels for sale on the classified section of this site. The wheels were second hand as stated, but in very good condition. I stated everything about the wheels and was very upfront about all physical aspects of the wheels. After heaps of interest and the usual time wasters a genuine buyer came foword. Due to the fact I had dealt with so many non legit buyers in the past and had so many time wasters I was really specific with aspects of the tyre wear and the condition of the wheels and tyres, as I didnt want to waste his time nor my own. I know I explained everything accurately as we meet in Sydney to make the exchange and I didnt want to drive 3 hours get there and have the buyer say I didnt mention something and say they are not what I said and not buy them.

Now the deal went through, the buyer expressed that the rear tyres where worn on the insides as I explained but was happy that the front ones where better than I had explained so that was a pleasant suprise. He thoroughly inspected the wheels agreed they where in the condition I had specified and bought them. Please remember he inspected the wheels then bought them I didnt hide anything the wheels where there for him to look at!!!

The following day My brother and I both recieved phone calls and messages saying we had to organise a way to refund partial payment on the rims as they where not what he agreed on. I didnt really understand as he looked at them took them and paid us, there is no secret science to tyres and wheels you can see the condition and see exactly what you are getting when you look at them.... I rang him today and it was explained to me that he went to get the tyres rotated on the rims, the same day the tyre shop rang him and said the sidewalls on one or two (dont remember) of the tyres had exploded out (ie. split the inner casing). They then went on to say it wasnt their fault and the sidewalls were already split by the previous owner (ME) from running them on too low of a pressure.... The buyer now wants us to refund him the price of two new tyres as he believes the tyre shop!!!! ( they where always run on 38psi)

Any respectable tyre shop will tell you, changing really low profile tyres is a pretty hard job. You have to be super carefull with the prongs so as not to scratch the rims but keeping the prong up off the rim means you run the risk of tearing the inside casing of the tyres, which is what I believe happened in this case.... Heres my arguement:

First the buyer inspected the wheels and tyres, if the sidewall was split you could either see a huge bulge in the sidewal or see a crack/tear in the tyre, it would be really obvious.

Second the tyres would not hold any pressure, I have had the wheels sitting in the workshop for over 4 months and they havent lost 1 pound of air, and if it was a torn inside wall they would go down over night so even before he took them to the tyre shop you would notice something is up and the tyre place would inform him about it before they started basically to cover their ass.

Third logic says if you take a perfectly good product to a certain place to have the product worked and something goes wrong at that place, wouldnt you blame them not some guy three steps back in the equation????

To put a long story short if there was damage to the wheels it would be blatently obvious, and I would not have sold the wheel in such a state, but beside that fact the buyer inspected the wheel and bought them, as he could see they were in good condition and had no damage.

The reason behind this story is to get peoples opinions on what I should do???

I dont want to seem like an A hole to this guy as I think he is a pretty decent guy, but he is under the impression I screwed him, and its pretty hard not to get angry when someone accuses you of that when its not true!!! So any advice opinions is greatly appreciated.

Regards,

Daniel

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/
Share on other sites

Seems a pretty difficult situation mate.............................

From your side of the story it seems that you tried to do the best you could to describe them, he knew what to expect before he had even seen them. Obviously the tyre shop won't accept responsibility (be a good idea to find out who it was, it could be a dodgy place, but don't mention names in here), but from my view once he has agreed to buy them, thoroughly inspected them & taken possession of them, they are no longer anything to do with you.

For the other guy I would just say bad luck, & to get 2 tyres for free from the shop that is the most likely to have damaged them. I don't think anyone would be silly enough to sell damaged tyres, or even sillier to buy them. Good luck with it all.

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/#findComment-1396574
Share on other sites

Don't take the opinon of one tyre shop. Take it to another tyre shop and see if they diagnose it in the same condition as the previous tyre shop. One thing you should learn in the motor industry is not to take the opinon of one person or company. If you don't want to seem like an a$$hole even pay for the tyres to be inspected at another tyre shop if need be.

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/#findComment-1396582
Share on other sites

Its called "buyer beware"... once he paid you the cash and he took the goods, theyre not your problem anymore.

As you pointed out, if the sidewal was indeed cracked, the tyres wouldnt hold any pressure. Id delightfully tell him to cram it with walnuts, its obvious hes trying to screw some money from you.

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/#findComment-1396835
Share on other sites

yeah buyer beware but the thing that gets me cut is that they werent in bad condition, I definately sold them to him without the damage that magically occured at the tyre shop and was somehow my fault!!!!! I just wanted to gauge what people thought of the situation, and what you thought my obligation was cuase he is under the impression I owe him two new tyres cause the tyre shop claims that it wasnt their fault.

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/#findComment-1397794
Share on other sites

Considering that he inspected them and the fact that they are second hand, i'd say its not your problem. I reckon the tyre shop has damaged them.

If I was him I would just accept it and deal with it. Thats the risk you take when buying stuff second hand. He probably realises that, but is just trying to see if he can get money out of you.

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/#findComment-1397856
Share on other sites

Sounds like you've done all you can - I think if you don't want to be an asshole you have to tell him all of the logic (assuming you haven't already).

Tell him they wouldn't hold any pressure if what the tyre shop is saying is true. Make mention to him that you're trying to help him and you should then ask him for the benefit of the doubt enough to call the tyre place to clarify.

Obviously if the sidewall was cracked when he picked it up they would be flat when they got to the shop so he should ask them their reasoning as to why it cracked when they did it.

Also - ask him to go have a look at the tyres themselves and ask him if the buggered sidewalls was something he'd have seen as being ok when he inspected them.

Good luck hope you both work it out and are happy with the outcome.

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/#findComment-1398036
Share on other sites

buyer beware !!!

what would you do if it were an engine? or you sold him a turbo?

looks good feels good etc.

at the end of the day he makes the decision to buy SECOND HAND PRODUCTS so its up to his disgression! not yours on the choice to purchase the goods

personally i think you are being too nice in tryin to help him out.

these are the wheelings and dealings of the secondhand market

research and knowledge is the key !!

but whats to say he put them on straight away thinkin they were all good and in a month he found them to be no good would you think the same i dont think so!!

just my 2 cents could be way off but just something to think bout!

stick to your guns! he bought them as is his problem i believe

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/#findComment-1398259
Share on other sites

Thanks for all the replies....

I felt like saying that its tuff tittie you bought them in the first place but tried to help him out... What if he put them straight on the vehicle and they exploded??? How was I to know that would happen, how can I predict the future???? Its like if I bought a second hand TV, checked it out saw it working, took it home and it blew when I first turned it on... thats not the sellers problem when honestly they didnt know that would happen!!!!!

I just wanted to see if people agreed that something like he is claiming a cracked sidewall would be noticable and could be seen on inspection.... ANd thatI have done the right thing refusing giving him money back off the price after he has taken the goods.... the reason he didnt notice this is cause there was nothing wrong with the tyre when I sold it to, and thats my arguement!!!!!!! Once they are his then whatever happens to the tyre once under his care is not problem.... THis is exactly what I have told him I just wanted too check if I was saying and acting the right way, because I buy and sell on here alot and didnt want to get my reputation tarnished by a tyre shop or indeed the buyer trying to make me responsible for something that common sense says I have nothing to do with. As a note I rang Falkin Aus today about the issue and he agreed the side walls on a modern tyres dont just explode or crack. He talked me through some causes to the type of damamged explained to me 1) a heavy impact, which on low profile tyres usually results in a dent and/or buckled rim)very noticable) 2) a torn side wall or cracked side wall from galging the tyre with somethin and he said it would stand out as a big bulge in the tyre or as a crack which leaked air rapidly. The wheels had niether before I sold them..

Again thanks to all that listed, Cheers,

Daniel.

Link to comment
https://www.sau.com.au/forums/topic/76162-what-should-i-do/#findComment-1398313
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...