Jump to content
SAU Community

Recommended Posts

How are ya guys, ok heres the question, a friend of mine is gettin an R34 GT-T privatly imported and he has asked me if I could find out if there is any places in adelaide that will complie it for him. And for what kind of cost. Or would anyome have a contact for any of these places. Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/
Share on other sites

How are ya guys, ok heres the question, a friend of mine is gettin an R34 GT-T privatly imported and he has asked me if I could find out if there is any places in adelaide that will complie it for him. And for what kind of cost. Or would anyome have a contact for any of these places.     Cheers guys

No r34 compliance in sa yet, pvp can only do r33s atm, best enterprise are getting closer to getting compliance plates but the longer you wait the more the prices increase:(

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1405573
Share on other sites

incorrect popeye - my 4 door R34GTT is getting complied by Best Enterprises when it arrives in the next 3-4 weeks. They have plates available, and for the 4 door version (I assume 2 door is the same), the cost is $5,200 including GST, and that includes an $1,100 allowance new 17" tyres (the tyres HAVE to be absolutely brand new). I have paid a deposit and it is all organised already, so they DEFINITELY do it. Call Joanne Easterbrook 8262 6055, they are at 75 Churchill Rd North, Dry Creek. I found a place in Brisbane that can do it for $3,850 (without tyres), but the cost of trucking etc is not worth the small saving. Let him know that the car has to be COMPLETELY stock to go through compliancing - COMPLETELY STOCK - no ifs, ands, or buts. Subsequently I have tracked down some stock R34GTT wheels (thanks mxtcy), stock suspension (from Abo Bob), and am still looking for a stock 4-door exhaust. I am personally going to pick up the car from the wharfs, take it home and stock it out, then deliver it to Best Enterprises for compliancing. I think as part of the process they send it through Regency for you, so the car is ready to register when you get it back. The whole process takes around 2 weeks, and Best Enterprises have to get plate approval etc from Canberra, so need 2-3 weeks notice before they are allowed to touch the car.

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1405694
Share on other sites

I had a look at the r34 my friend was telling me about and all that has been done to it is a 3' exhaust and 18' mags. i have another friend with a completely stock r34 gtt. would this work if the 2 guys swapped a few parts while the process was happening??

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1405824
Share on other sites

it was a bit less than 23k, thats not complied. the company says bout $3500, i told him to allow atleast $3000 on top of that.and you said bout $5,200 at best entreprise. so it looks like it will b round 28k complied

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1413127
Share on other sites

That is still a good price!

Yeah, you can drive to the workshop on your tyres, but you must have a new/current receipt for them, else they will not comply. There are a heap of different things you have to do before the car can go in for compliance .... you have to sign a RAW work agreement form and pay $1,265 deposit before they can even apply for an import approval. An approval takes between 7-10 days and comes from Canberra. Only then can they even think about actually doing the compliance. It is vital you/he get a strict inspection somewhere else to make sure the car is 100% ok for compliance, as if the compliance workshop finds one tiny bit of dent or rust in the chassis or vital parts, they will immediately and without discussion brand the car damaged, and you can NEVER get it complied in Australia - even if you fix the damage. The car then has to be scrapped, or you have to pay to have it exported. They take this VERY seriously, and there is absolutly no leeway for compliance workshps, they 100% work within the guidelines.

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1413143
Share on other sites

That is still a good price!

It is vital you/he get a strict inspection somewhere else to make sure the car is 100% ok for compliance, as if the compliance workshop finds one tiny bit of dent or rust in the chassis or vital parts, they will immediately and without discussion brand the car damaged, and you can NEVER get it complied in Australia - even if you fix the damage. The car then has to be scrapped, or you have to pay to have it exported. They take this VERY seriously, and there is absolutly no leeway for compliance workshps, they 100% work within the guidelines.

This is a bit odd. My family work in both light and commercial aviation, and no wreck is considered "not repairable". If it is cheaper to fix than replace, it will gey fixed. (this includes planes that crash into trees and have the wings ripped off) So long as the work is signed off by a Licenced Aircraft Maintenance Engineer, all is good.

Why do they let aircraft fly after a wreck but not a car with a minor problem?

I dont doubt your word Andrew, but just dont understand the logic used by government. I guess they will do anything to protect local manufacturers.

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1413209
Share on other sites

yeah it doesn't make much sense .... even things like the tyres have to be BRAND NEW makes no sense .... as long as the tyres are roadworthy why does it matter?

But yeah, when you sign the RAWs work agreement it explicitly says at the bottom "I, xxxx, understand that if I purchase an accident damaged or rusted vehicle it will, under the import regulations, be required to be scrapped or exported." Very harsh if it is an accident repaired vehicle - even some very minor accidents are considered unroadworthy - even if they are completely professionally fixed!! Show me ANY 1999 falcodore that would satisy these criteria and I would eat my hat! (Well not literally, but you get my point).

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1413225
Share on other sites

incorrect popeye - my 4 door R34GTT is getting complied by Best Enterprises when it arrives in the next 3-4 weeks. They have plates available, and for the 4 door version (I assume 2 door is the same), the cost is $5,200 including GST, and that includes an $1,100 allowance new 17" tyres (the tyres HAVE to be absolutely brand new). I have paid a deposit and it is all organised already, so they DEFINITELY do it. Call Joanne Easterbrook 8262 6055, they are at 75 Churchill Rd North, Dry Creek. I found a place in Brisbane that can do it for $3,850 (without tyres), but the cost of trucking etc is not worth the small saving. Let him know that the car has to be COMPLETELY stock to go through compliancing - COMPLETELY STOCK - no ifs, ands, or buts. Subsequently I have tracked down some stock R34GTT wheels (thanks mxtcy), stock suspension (from Abo Bob), and am still looking for a stock 4-door exhaust. I am personally going to pick up the car from the wharfs, take it home and stock it out, then deliver it to Best Enterprises for compliancing. I think as part of the process they send it through Regency for you, so the car is ready to register when you get it back. The whole process takes around 2 weeks, and Best Enterprises have to get plate approval etc from Canberra, so need 2-3 weeks notice before they are allowed to touch the car.

my bad ur right, i havent checked the update for a while

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1414899
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...