Jump to content
SAU Community

Recommended Posts

How are ya guys, ok heres the question, a friend of mine is gettin an R34 GT-T privatly imported and he has asked me if I could find out if there is any places in adelaide that will complie it for him. And for what kind of cost. Or would anyome have a contact for any of these places. Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/
Share on other sites

How are ya guys, ok heres the question, a friend of mine is gettin an R34 GT-T privatly imported and he has asked me if I could find out if there is any places in adelaide that will complie it for him. And for what kind of cost. Or would anyome have a contact for any of these places.     Cheers guys

No r34 compliance in sa yet, pvp can only do r33s atm, best enterprise are getting closer to getting compliance plates but the longer you wait the more the prices increase:(

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1405573
Share on other sites

incorrect popeye - my 4 door R34GTT is getting complied by Best Enterprises when it arrives in the next 3-4 weeks. They have plates available, and for the 4 door version (I assume 2 door is the same), the cost is $5,200 including GST, and that includes an $1,100 allowance new 17" tyres (the tyres HAVE to be absolutely brand new). I have paid a deposit and it is all organised already, so they DEFINITELY do it. Call Joanne Easterbrook 8262 6055, they are at 75 Churchill Rd North, Dry Creek. I found a place in Brisbane that can do it for $3,850 (without tyres), but the cost of trucking etc is not worth the small saving. Let him know that the car has to be COMPLETELY stock to go through compliancing - COMPLETELY STOCK - no ifs, ands, or buts. Subsequently I have tracked down some stock R34GTT wheels (thanks mxtcy), stock suspension (from Abo Bob), and am still looking for a stock 4-door exhaust. I am personally going to pick up the car from the wharfs, take it home and stock it out, then deliver it to Best Enterprises for compliancing. I think as part of the process they send it through Regency for you, so the car is ready to register when you get it back. The whole process takes around 2 weeks, and Best Enterprises have to get plate approval etc from Canberra, so need 2-3 weeks notice before they are allowed to touch the car.

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1405694
Share on other sites

I had a look at the r34 my friend was telling me about and all that has been done to it is a 3' exhaust and 18' mags. i have another friend with a completely stock r34 gtt. would this work if the 2 guys swapped a few parts while the process was happening??

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1405824
Share on other sites

it was a bit less than 23k, thats not complied. the company says bout $3500, i told him to allow atleast $3000 on top of that.and you said bout $5,200 at best entreprise. so it looks like it will b round 28k complied

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1413127
Share on other sites

That is still a good price!

Yeah, you can drive to the workshop on your tyres, but you must have a new/current receipt for them, else they will not comply. There are a heap of different things you have to do before the car can go in for compliance .... you have to sign a RAW work agreement form and pay $1,265 deposit before they can even apply for an import approval. An approval takes between 7-10 days and comes from Canberra. Only then can they even think about actually doing the compliance. It is vital you/he get a strict inspection somewhere else to make sure the car is 100% ok for compliance, as if the compliance workshop finds one tiny bit of dent or rust in the chassis or vital parts, they will immediately and without discussion brand the car damaged, and you can NEVER get it complied in Australia - even if you fix the damage. The car then has to be scrapped, or you have to pay to have it exported. They take this VERY seriously, and there is absolutly no leeway for compliance workshps, they 100% work within the guidelines.

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1413143
Share on other sites

That is still a good price!

It is vital you/he get a strict inspection somewhere else to make sure the car is 100% ok for compliance, as if the compliance workshop finds one tiny bit of dent or rust in the chassis or vital parts, they will immediately and without discussion brand the car damaged, and you can NEVER get it complied in Australia - even if you fix the damage. The car then has to be scrapped, or you have to pay to have it exported. They take this VERY seriously, and there is absolutly no leeway for compliance workshps, they 100% work within the guidelines.

This is a bit odd. My family work in both light and commercial aviation, and no wreck is considered "not repairable". If it is cheaper to fix than replace, it will gey fixed. (this includes planes that crash into trees and have the wings ripped off) So long as the work is signed off by a Licenced Aircraft Maintenance Engineer, all is good.

Why do they let aircraft fly after a wreck but not a car with a minor problem?

I dont doubt your word Andrew, but just dont understand the logic used by government. I guess they will do anything to protect local manufacturers.

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1413209
Share on other sites

yeah it doesn't make much sense .... even things like the tyres have to be BRAND NEW makes no sense .... as long as the tyres are roadworthy why does it matter?

But yeah, when you sign the RAWs work agreement it explicitly says at the bottom "I, xxxx, understand that if I purchase an accident damaged or rusted vehicle it will, under the import regulations, be required to be scrapped or exported." Very harsh if it is an accident repaired vehicle - even some very minor accidents are considered unroadworthy - even if they are completely professionally fixed!! Show me ANY 1999 falcodore that would satisy these criteria and I would eat my hat! (Well not literally, but you get my point).

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1413225
Share on other sites

incorrect popeye - my 4 door R34GTT is getting complied by Best Enterprises when it arrives in the next 3-4 weeks. They have plates available, and for the 4 door version (I assume 2 door is the same), the cost is $5,200 including GST, and that includes an $1,100 allowance new 17" tyres (the tyres HAVE to be absolutely brand new). I have paid a deposit and it is all organised already, so they DEFINITELY do it. Call Joanne Easterbrook 8262 6055, they are at 75 Churchill Rd North, Dry Creek. I found a place in Brisbane that can do it for $3,850 (without tyres), but the cost of trucking etc is not worth the small saving. Let him know that the car has to be COMPLETELY stock to go through compliancing - COMPLETELY STOCK - no ifs, ands, or buts. Subsequently I have tracked down some stock R34GTT wheels (thanks mxtcy), stock suspension (from Abo Bob), and am still looking for a stock 4-door exhaust. I am personally going to pick up the car from the wharfs, take it home and stock it out, then deliver it to Best Enterprises for compliancing. I think as part of the process they send it through Regency for you, so the car is ready to register when you get it back. The whole process takes around 2 weeks, and Best Enterprises have to get plate approval etc from Canberra, so need 2-3 weeks notice before they are allowed to touch the car.

my bad ur right, i havent checked the update for a while

Link to comment
https://www.sau.com.au/forums/topic/76267-compliance/#findComment-1414899
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
×
×
  • Create New...