Jump to content
SAU Community

Recommended Posts

Hi ppl, my first post on these forums, hopefully many more to come.

I've owned an S13 K for 5 years now, and am trading in it and another S13 for a R32 GT-R, shopping for one at the moment.

Rezz, I've been pointed in your direction as a possible source for info on the factory nismo R32 GT-R's - by a fellow member (Brendan).

Any info you can offer on this model, i.e. over the standard R32 GT-R, would be VERY VERY much appreciated. I will be looking at and probably driving the car tomorrow. Said car is at www.streetmachines.com.au, you can see it on their "cars for sale" pages.

I'll be going over the thing with a fine tooth-comb, but being new to GT-Rs and remembering just how little I knew about Silvias when I bought one - I am seeking any info, advice that I can find.

Of course, if anyone else is familiar with these babies please give me some help :D

Cheers guys,

Andrew

EDIT: 1989 model, btw... :)

Link to comment
https://www.sau.com.au/forums/topic/77342-factory-nismo-r32-gt-r-1989/
Share on other sites

Andrew, i used to live in brissy and i haven't heard anything positive about that car yard. Go over the thing with the finest toothed comb you can find. Good luck!

Well, I did buy my '93 Silvia K from there. Had it five years, and very happy with it. I do KNOW they are on the expensive side, but they do have great cars there, seemingly consistently - at least when I visit anyway. Don't worry, I've got a few yards on my test drive itinerary (no joke, I have an itinerary and list of checks for each car!) for tomorrow. I'll be making them do battle for my business ;)

I agree, I've heard bad things, but not about the cars - have you? I know they'll try to rip ya, but that's okay, "no" is a simple defence against that. Have you heard anything nasty about their machinery/service?

The allure of the Nismo factory is not something that will bite me too bad, unless it's got N1 turbos and big squirters and a modded ECU. If that's the case, I might just be smitten. I don't like the grey too much though :D

Thanks mate,

Andrew

EDIT: Not grey, silver :D

Ok, here are the things that make a GT-R Nismo what it is:

Metal turbines in the turbo

No intercooler grill

twin air intakes either side of the front number plate

boot lid lip spoiler

no aircon

no stereo

no ABS

no rear wiper

revised projector headlights

Nismo sticker on boot lid ;)

Unlike the regular GT-R's, the Nismo models were only available in Gun Grey Metallic paint (KH2), and they were the lightest of the BNR32's weighing in at a clean 1400kg. Only 500 were made, starting production on the 22nd February 1990 and ending on the 11th March 1990. Everything else is pretty much the same as the regular GT-R.

I don't have to tell you that the car in the pics above is SILVER, so unless the car wasn't looked after or had crash damage at some stage and thus entirely repainted, it probably isn't a genuine Nismo GT-R. In fact, I can see from the interior pic that that car has climate control aircon, so it's a safe bet that it isn't genuine. Nismo GT-R's are pretty sought after, I find it hard to believe that someone would retro-fit aircon and respray the thing silver... I hope this info helps.

 

I don't have to tell you that the car in the pics above is SILVER, so unless the car wasn't looked after or had crash damage at some stage and thus entirely repainted, it probably isn't a genuine Nismo GT-R. In fact, I can see from the interior pic that that car has climate control aircon, so it's a safe bet that it isn't genuine. Nismo GT-R's are pretty sought after, I find it hard to believe that someone would retro-fit aircon and respray the thing silver... I hope this info helps.

Rezz, that's GOLD!!! And timing is great, I'm going tomorrow (about 10 hrs time, assuming I can stop surfing and actually sleep sometime soon). I've been dreaming (ok, almost wet-dreaming) about a GT-R for YEARS now, and it's so close it's actually messing with my head! Bizarre...

Thanks v much, I can verify it's authenticity to an extent, and stun them with my (your) knowledge at the same time .... heheh

Thanks again, ur a ledge...

Andrew

Attached is another propective car. Is this the gunmetal color you speak of? It's not NISMO, not purported to be nismo. It's an '89. Has V-Spec 324mm brakes (and 300 rears it looks, will check tomorrow), and a tube-fin FMIC. Concern is the 310km/h speedo, so the ODO obviously can't be trusted (if it ever could be). I have to go hard on the mech/condition checks to "guess" the mileage. I've seen it in the flesh and I loved it (salivated is the word), will drive it tomorrow.

Rezz, that's GOLD!!! And timing is great, I'm going tomorrow
No worries Andrew, I'm glad I could help ;)
Attached is another propective car. Is this the gunmetal color you speak of? It's not NISMO, not purported to be nismo. It's an '89. Has V-Spec 324mm brakes (and 300 rears it looks, will check tomorrow), and a tube-fin FMIC. Concern is the 310km/h speedo, so the ODO obviously can't be trusted (if it ever could be). I have to go hard on the mech/condition checks to "guess" the mileage. I've seen it in the flesh and I loved it (salivated is the word), will drive it tomorrow.

Heres a KH2 Gun Grey metallic R32 GT-R in broad daylight, but the pic you posted looks a little dark? Could just be the time of day the pic was taken but yeah, by all means check out the other GT-R, it sure sounds like your hungry for some ATESSA RB26DETT goodness :jump:

No worries Andrew, I'm glad I could help ;)

Heres a KH2 Gun Grey metallic R32 GT-R in broad daylight, but the pic you posted looks a little dark? Could just be the time of day the pic was taken but yeah, by all means check out the other GT-R, it sure sounds like your hungry for some ATESSA RB26DETT goodness :jump:

Yep, same color, shitty photo (mine).

Heheh thanks I now have full size photo quality print of a true nismo colour :D

And hungry? Ain't the word. So STARVING it's a little scary, I'm 29 not 18! But, it's all good - that's why we do it innit? :D

Still, I'm a responsive kinda guy - just ask my girlfriend... hahaha roflol

Kid in a candy store,

Andrew

Went and saw this "factory nismo" car today. Apart from the greasy feeling from the sales guys, I found this:

Black engine bay, and silver body. The rocker cover was nismo-convincing, with the red n black rocker and silver/metal coil-pack cover. The thing has full factory climate control, factory stereo, and the front spoiler was a bit loose, like it had been smacked. That and the price of the car being same as standard with same kms, coupled with the guys being obnoxious, completely turned me off.

The guys said they made these cars in black. The factory plate was gone, just holes where is was, painted over. Dodgyyyy is my feeling :D I walked away.

Attached is pic (crappy, from my Nokia 6230) of the missing compliance plate.

The front spoiler was loose also, visible gap between the spolier and the guard.

I've also attached pics of the car I've put a deposit on. I have a few Qs about this car, which I'll be posting up with info on it...

Thanks for your help Rezz,

Andrew

EDIT: Couple of R32 GT-R Q's, and info on the car I'm buying...

http://www.skylinesaustralia.com/forums/sh...133#post1416133

hey,

I've got a nismo r32gtr and there seems to be some shit being flown around about the differences.

If climate control and stereo didn't come with them then i've got it. I've got the blue plate and i've checked the vin and it all checks out. i've got the nismo spoiler the oblong sticker underneath the spoiler. the nismo edition obviously came with the kit with side skirts that hug the rear wheel, bonnet lip and front lip. i do not have abs brakes and it came with a bigger standard intercooler. the turbs are meant to have steel wheel but not bb however i haven't taken out my turbs to confirm this.

nOOSE

Sorry, I messed that post up. Let me clarify - I walked away from the Nismo. I don't believe it's the real thing, only reason.

The car I put a deposit on is a standard R32, very clean, very stock. Only thing left to check is compression.

Speaking of which, anyone know off hand what the acceptable range is?

Andrew

EDIT: found that - 171psi standard or 128 worst (shit that's low!)

i thought the N1 GT-R was the one with out all the a/c abs stereo ect and the nismo edition had all the bar vents, bonnet/boot lip, steel turbines ect..

Actually, the N1 version *was* just like a Nismo GT-R, but only available in Crystal White (326) with the N1 headlights (non-projector), upgraded engine cooling system and upgraded brake system (brake lines, booster etc for more stopping power) for the N1 endurance race series. Aparently all that accounted for an extra 50kgs to bring the total weight up to 1450kg for the original batch of R32 GT-R N1's. The Nismo versions on the other hand were for Group A Turing Car homologation only... hence why we didn't see a factory R33 Nismo version. The Group A cars were completely stripped and rebuilt, not needing stronger factory internals like the N1s, whereas the N1 cars were virtually run 'as is' in competition.

The thing you have to remember about the N1 versions is that they had to be registered with the JAF and sold through the dealership like a regular GT-R, even though they were sold for racing use mainly. 500 had to be sold in order for the N1 to be eligable for the N1 Endurance race series. Just an extra 145,000 yen would net you aircon, audio, rear wiper etc with a standard GT-R, so the appeal of an N1 for street use was limited to say the least.

Here are a couple of shots of the Nismo interior sans aircon and audio, and the part of the article where it states the Nismo came without rear wiper, ABS etc:

[/color]

Actually, the N1 version *was* just like a Nismo GT-R, but only available in Crystal White (326) with the N1 headlights (non-projector), upgraded engine cooling system and upgraded brake system (brake lines, booster etc for more stopping power) for the N1 endurance race series. Aparently all that accounted for an extra 50kgs to bring the total weight up to 1450kg for the original batch of R32 GT-R N1's. The Nismo versions on the other hand were for Group A Turing Car homologation only... hence why we didn't see a factory R33 Nismo version. The Group A cars were completely stripped and rebuilt, not needing stronger factory internals like the N1s, whereas the N1 cars were virtually run 'as is' in competition.

The thing you have to remember about the N1 versions is that they had to be registered with the JAF and sold through the dealership like a regular GT-R, even though they were sold for racing use mainly. 500 had to be sold in order for the N1 to be eligable for the N1 Endurance race series. Just an extra 145,000 yen would net you aircon, audio, rear wiper etc with a standard GT-R, so the appeal of an N1 for street use was limited to say the least.

Here are a couple of shots of the Nismo interior sans aircon and audio, and the part of the article where it states the Nismo came without rear wiper, ABS etc:

Hey Rezz, any chance of posting some hi res versions of the article/brochure up in you photos section?

Here's something interesting (to me at least).

Let me clarify first I have walked from what I myself personally believe to be fake Nismo GT-R.

Anyway,

http://www.skylinesaustralia.com/forums/sh...ead.php?t=77434

This is the car I am now buying, kitted out to look just like a factory NISMO; not purported to be one.

Now, the boot lid has a vaguely noticeable oval indentation in the paint, exactly where the NISMO badge is on the back of the car you posted a pic of (Rezz).

Interesting - perfect Nismo kit, now evidence of a nismo badge. I'll have to check under the spoiler I guess...

:confused:

Hey Rezz, any chance of posting some hi res versions of the article/brochure up in you photos section?

Believe it or not, those pics above are the bulk of the Nismo GT-R 'article'. Theres a full size side-on shot of the Nismo GT-R, but alot of the info I got was from a comparison chart of all the GT-R's together with all the associated specs and sizes etc. Other than that, not much. It's in the 'GT-R Memorial' book which I think quite a few members have on these forums.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...