Jump to content
SAU Community

Recommended Posts

Hey guys,

I've had problems starting my car. This is what can be ruled out.

1) I've got 2 brand new batterys now. One extra extra heavy duty with big plates.

2) Alternator is fine, when car is on volts is 14.2

3) Starter motor is fine too.

Now the problem is that, i charge my battery, end up being like 14.1 volts (that was after a few hours) and the car starts fine. However, once the car sits (today i drove it at 8.30am) and went to start it at 1.00pm the car was dead? :confused:

I know for a fact that my alternator is charging the battery, because within a hour after it can still start.

I have no amp, no headunit, but i do have neons (not on however)

Should i take these out to rule them out of the question too?

I also have a brant alarm, but i dont know if this could be the problem? how could i find out, i dont know where it is or how 2 by pass it? If anyone knows that can you PM me.

If anyone has had this problem before, would you be able to tell me what it was on yours? or what i could try. Thanks in advance.

This is a really frustrating matter!

Dayne

Link to comment
https://www.sau.com.au/forums/topic/77613-what-could-it-be/
Share on other sites

it sounds like something is draining your battery , to make sure the battery is good charge it up then disconect it ( the the neg off the battery ) , leave it for for a couple of days then try to start it . If it starts normal then the battery is good so you can look elsewhere .

Link to comment
https://www.sau.com.au/forums/topic/77613-what-could-it-be/#findComment-1418810
Share on other sites

I know for a fact that the battery is fine. But thanks for that anyway.

I just disconnected my headunit properly (terminated the wires) as well as neons in car, and underbody. I also removed the earth off the alarm. So i'll go down and see in 5 or so hours if the car still starts, then i can eliminate it from there. Just a question, who can remove brant alarms? should anyone be able to do it?

Dayne

Link to comment
https://www.sau.com.au/forums/topic/77613-what-could-it-be/#findComment-1418894
Share on other sites

how do i check if its the regulator andrew?
Get hold of a multi-meter, set to 20V DC. Fire up the engine.

Measure V across battery terminals - should be around 14V at idle

Now increase revs- V should remain around 14V.

If V increases, then regulator is kaput.

Link to comment
https://www.sau.com.au/forums/topic/77613-what-could-it-be/#findComment-1418937
Share on other sites

it stays at 14.2 when the car is on.

With what you said race_snooze, the car will remain to start for a few hours after. Its after this period of time that the power is gone. so something is draining it, so now i can rule out regulartor, starter motor, battery, alternator. I'll find out soon wether or not its the alarm doing this, and if i cant find the problem tonight, its off to an auto elect.

Cheers for all the input. keep it comming:D

Dayne

Link to comment
https://www.sau.com.au/forums/topic/77613-what-could-it-be/#findComment-1418966
Share on other sites

it stays at 14.2 when the car is on.

With what you said race_snooze, the car will remain to start for a few hours after. Its after this period of time that the power is gone. so something is draining it, so now i can rule out regulartor, starter motor, battery, alternator. I'll find out soon wether or not its the alarm doing this, and if i cant find the problem tonight, its off to an auto elect.

Cheers for all the input. keep it comming:D

Dayne

I had this problem in my car it was the back-up battery in the alarm. Coz the battery was stuffed in the alarm it tried charging it all the time and draining the car battery at the same time.You could try that?

Link to comment
https://www.sau.com.au/forums/topic/77613-what-could-it-be/#findComment-1419000
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...