Jump to content
SAU Community

Recommended Posts

I had a blue slip done with 2 pods exposed....

car was already engineered that way but i dunno if that made a difference.

ring around some inspection stations and see what THEY say :(

haha very tru, i got done the saturday before last at orange grove but got it cleared quite easily.

Link to comment
https://www.sau.com.au/forums/topic/78360-got-defected/#findComment-1432819
Share on other sites

Technically you don't need to enclose a pod filter (I've spoken to a couple of mechanics who did the Blue Slip course, and they all agree) but try explaining that to the cops.

Don't forget, the cops can still issue you with defect notice, even if you have an engineers certificate for the mods. Its only a "notice" (they only suspect it of being defective, they're not saying it is), so they can hand that to any car in any state of modification.

As an interesting tangental anecdote:

Some time ago Ford shipped one of their sedans (can't remember if it was an up-spec Falcon or Fairlane) with driving lights that came on automatically when the headlights were turned on (because it looks "cool" and all). This is, of course, illegal. The driving lights have to have a manual switch. So cops were pulling over dead stock cars and hitting the drivers up with fines for using their driving lights inappropriately.

When some drivers told the cops they couldn't be turned off (don't know how "politely" they did it), some cops then issued them with defect notices for having a car with illegal lighting. If they can do that to a dead stock, brand new, car then even with your engineer's cert they can still hand you a notice

Of course, in the above situation the cops are technically in the right. The car is defective (even though it left Broadmeadows like that) because it fails to comply with ADR rules. The owners can appeal for leniency, but the car breaks the letter of the law. They can, and I believe did, take it out on Ford (who also recalled the cars and installed a switch).

But even if your car is ADR compliant, don't forget the cop doesn't know that. They're only given enough basic training to spot potentially defective cars. When you get canaried, that's not saying your car is illegal. Its saying its potentially illegal, and needs someone qualified to check for sure.

So why bother having an engineer's certification at all? Aside from being a legal requirement (and I know we're all law abiding citizens here), its still peace of mind and the officer is more likely to believe you when you tell him its legal and not issue you with a notice.

Of course, if you're going to give him attitude and he's having a bad day, he can always "reasonably" argue that your car's mods don't resemble what's described in the engineer's cert and suspect you've modified further since the signatory inspected the vehicle or he'll find something else to issue a notice for.

Link to comment
https://www.sau.com.au/forums/topic/78360-got-defected/#findComment-1434457
Share on other sites

Technically you don't need to enclose a pod filter (I've spoken to a couple of mechanics who did the Blue Slip course, and they all agree) but try explaining that to the cops.

Don't forget, the cops can still issue you with defect notice, even if you have an engineers certificate for the mods. Its only a "notice" (they only suspect it of being defective, they're not saying it is), so they can hand that to any car in any state of modification.

As an interesting tangental anecdote:

Some time ago Ford shipped one of their sedans (can't remember if it was an up-spec Falcon or Fairlane) with driving lights that came on automatically when the headlights were turned on (because it looks "cool" and all). This is, of course, illegal. The driving lights have to have a manual switch. So cops were pulling over dead stock cars and hitting the drivers up with fines for using their driving lights inappropriately.

When some drivers told the cops they couldn't be turned off (don't know how "politely" they did it), some cops then issued them with defect notices for having a car with illegal lighting. If they can do that to a dead stock, brand new, car then even with your engineer's cert they can still hand you a notice

Of course, in the above situation the cops are technically in the right. The car is defective (even though it left Broadmeadows like that) because it fails to comply with ADR rules. The owners can appeal for leniency, but the car breaks the letter of the law. They can, and I believe did, take it out on Ford (who also recalled the cars and installed a switch).

But even if your car is ADR compliant, don't forget the cop doesn't know that. They're only given enough basic training to spot potentially defective cars. When you get canaried, that's not saying your car is illegal. Its saying its potentially illegal, and needs someone qualified to check for sure.

So why bother having an engineer's certification at all? Aside from being a legal requirement (and I know we're all law abiding citizens here), its still peace of mind and the officer is more likely to believe you when you tell him its legal and not issue you with a notice.

Of course, if you're going to give him attitude and he's having a bad day, he can always "reasonably" argue that your car's mods don't resemble what's described in the engineer's cert and suspect you've modified further since the signatory inspected the vehicle or he'll find something else to issue a notice for.

Nice to see someone who has a decent view on the general situation! :P

Link to comment
https://www.sau.com.au/forums/topic/78360-got-defected/#findComment-1438297
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...