Jump to content
SAU Community

Recommended Posts

Hey all. I am selling my R34gt.

It is 5-speed manual with a full body kit ,exhaust, rims,full ele, comes like most stock r34 etc. Is in very good condition, no accidents. One of a kind.

But what should I ask for it?

I was looking around 25-30 with rego and rwc? Or 23-25 no rego??

Some help would be good as I don't have any idea what to sell it for.

After I sell it, I am getting another Skyline from my cousin. His old one which needs work, so I need as much as my car is worth.

If anyone wants to come and see it or buy it, PM me and I'll give you my address.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/
Share on other sites

What the hell do they teach in school these days?!

What he meant to say was:

Hey all. I am selling my R34gt.  

It is 5-speed manual with a full kit exhaust, rims, etc. Is in very good condition, no accidents. One of a kind.

But what should I ask for it?  

I was looking around 25-30 with rego and rwc? Or 23-25 no rego??

Some help would be good as I don't have any idea what to sell it for.

After I sell it, I am getting another Skyline from my cousin. His old one which needs work, so I need as much as my car is worth.

If anyone wants to come and see it or buy it, PM me and I'll give you my address.

So - the topic is resale values for R34 GT - GTTs.

Is an always active area - so thoughts from all are welcome. No need to keep it related to this particular car, general resales are fine.

Addicted: I'd recommend putting an ad in the for sale section of these forums. That may be a better place to work out what people are prepared to pay for your car.

And so help me if ANYONE posts such a poorly written thread again... :D

You're not writing King Lear here - it's just basic punctuation and grammar that we all learn in primary school. If you don't like it, and prefer to treat all conversations - written or otherwise - like some 1337 SMS, then go (and stay) here:

http://www.boostcruising.com/

James

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448575
Share on other sites

And so help me if ANYONE posts such a poorly written thread again...

if u dont like seeing it dont read it i dint post it so ppl would have a go at me i dint know skylines aus was" SO POSH " how i do my punctuation and grammar is my best eve thought that mabye not eve 1 is like u who comes from a good backround and thacks for your re styleing of my r34 4 sale i use it 2 make u happy n others since i dat bad at punctuation and grammar

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448624
Share on other sites

Hey all. I am selling my R34gt.

It is 5-speed manual with a full body kit ,exhaust, rims,full ele, comes like most stock r34 etc. Is in very good condition, no accidents. One of a kind.

But what should I ask for it?

I was looking around 25-30 with rego and rwc? Or 23-25 no rego??

Some help would be good as I don't have any idea what to sell it for.

After I sell it, I am getting another Skyline from my cousin. His old one which needs work, so I need as much as my car is worth.

If anyone wants to come and see it or buy it, PM me and I'll give you my address.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448630
Share on other sites

Sorry mate I can't work out that second post past the "SO POSH" bit. Not being funny but I have no idea what the rest means.

A tip, why not sell it based on what you paid for it taking into account modifications and time owned.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448632
Share on other sites

yes i have done this but what i paid for it was 2 cheap as i come from a big family and buy most my things of cusins, i had it for 2 years did no mods but put rims 17"roh drift R ?? cant any one give me a rough idea of what it is worth??

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448656
Share on other sites

is your car spoiler less with vented bonet?? i think i saw it once in springy.

why dont you do some research and check auto trading post/mags for a ball park figure, compare what mods they have and adjust your price accordingly. by the way yours is non-turbo right as its a GT.

by the way thumbs up on fixing your grammar. had a bloody hard time understanding what you wrote in your second post.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448697
Share on other sites

hey dude,

if you want to get an idea of what they are worth, have a look on something like

www.carsales.com.au and see what other people are selling them for. Print out what you find, and then check each day to see which ones get sold and which ones don't, that should give you an idea.

oh, and i saw you write something about not being a smart kid just because you can't spell, thats bullshit! Just because you can't write/spell does not mean your dumb, there's alot more to it than that. Everyone has stuff that they're good and bad at, and i'll bet that there is some stuff your better at than other people.

mike

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448762
Share on other sites

ADDICTED2R34s, wat nationality r ya dude?

Nationality is not important here and yes if you want to know how much your car worth you should have done your research on the tradding post, carsales...ect

nar its has a full bomex kit and yer i live in springy, and looked in post ect and found none like mine any wear as if no1 is selling there no turbos?? its a 1999. sry about spelling and that i cant spell i not a smart kid

You want people to understand you better and being able to help you out you should not use too much short cut.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448815
Share on other sites

whole shit man theres non tubos on there that have no kits look pretty stock going 4 27k!!!

ye and thats y they have been there for a long time cause no 1 will buy them, how come u wanna sell ur R34, id keep it till im off my P's and then go GT-T, how old r ya now?

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448999
Share on other sites

The same night on chaple my car copyed a yellow sticker on it lol,iam 17 man i lernt in dat car 4 2 years n know i wont something bit more quicker till i can handle power well and get a r34gtr in years 2 come i hope :)

btw i wasnt driveing that night my mate was i was just in front seat ,i got diked 4 nothing man the tested how loud my car was by one of the cops ears and my Gt wing could cut some1s hand,head,body ect n my number plate light was blown

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1452285
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...