Jump to content
SAU Community

Recommended Posts

Hey all. I am selling my R34gt.

It is 5-speed manual with a full body kit ,exhaust, rims,full ele, comes like most stock r34 etc. Is in very good condition, no accidents. One of a kind.

But what should I ask for it?

I was looking around 25-30 with rego and rwc? Or 23-25 no rego??

Some help would be good as I don't have any idea what to sell it for.

After I sell it, I am getting another Skyline from my cousin. His old one which needs work, so I need as much as my car is worth.

If anyone wants to come and see it or buy it, PM me and I'll give you my address.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/
Share on other sites

What the hell do they teach in school these days?!

What he meant to say was:

Hey all. I am selling my R34gt.  

It is 5-speed manual with a full kit exhaust, rims, etc. Is in very good condition, no accidents. One of a kind.

But what should I ask for it?  

I was looking around 25-30 with rego and rwc? Or 23-25 no rego??

Some help would be good as I don't have any idea what to sell it for.

After I sell it, I am getting another Skyline from my cousin. His old one which needs work, so I need as much as my car is worth.

If anyone wants to come and see it or buy it, PM me and I'll give you my address.

So - the topic is resale values for R34 GT - GTTs.

Is an always active area - so thoughts from all are welcome. No need to keep it related to this particular car, general resales are fine.

Addicted: I'd recommend putting an ad in the for sale section of these forums. That may be a better place to work out what people are prepared to pay for your car.

And so help me if ANYONE posts such a poorly written thread again... :D

You're not writing King Lear here - it's just basic punctuation and grammar that we all learn in primary school. If you don't like it, and prefer to treat all conversations - written or otherwise - like some 1337 SMS, then go (and stay) here:

http://www.boostcruising.com/

James

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448575
Share on other sites

And so help me if ANYONE posts such a poorly written thread again...

if u dont like seeing it dont read it i dint post it so ppl would have a go at me i dint know skylines aus was" SO POSH " how i do my punctuation and grammar is my best eve thought that mabye not eve 1 is like u who comes from a good backround and thacks for your re styleing of my r34 4 sale i use it 2 make u happy n others since i dat bad at punctuation and grammar

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448624
Share on other sites

Hey all. I am selling my R34gt.

It is 5-speed manual with a full body kit ,exhaust, rims,full ele, comes like most stock r34 etc. Is in very good condition, no accidents. One of a kind.

But what should I ask for it?

I was looking around 25-30 with rego and rwc? Or 23-25 no rego??

Some help would be good as I don't have any idea what to sell it for.

After I sell it, I am getting another Skyline from my cousin. His old one which needs work, so I need as much as my car is worth.

If anyone wants to come and see it or buy it, PM me and I'll give you my address.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448630
Share on other sites

Sorry mate I can't work out that second post past the "SO POSH" bit. Not being funny but I have no idea what the rest means.

A tip, why not sell it based on what you paid for it taking into account modifications and time owned.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448632
Share on other sites

yes i have done this but what i paid for it was 2 cheap as i come from a big family and buy most my things of cusins, i had it for 2 years did no mods but put rims 17"roh drift R ?? cant any one give me a rough idea of what it is worth??

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448656
Share on other sites

is your car spoiler less with vented bonet?? i think i saw it once in springy.

why dont you do some research and check auto trading post/mags for a ball park figure, compare what mods they have and adjust your price accordingly. by the way yours is non-turbo right as its a GT.

by the way thumbs up on fixing your grammar. had a bloody hard time understanding what you wrote in your second post.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448697
Share on other sites

hey dude,

if you want to get an idea of what they are worth, have a look on something like

www.carsales.com.au and see what other people are selling them for. Print out what you find, and then check each day to see which ones get sold and which ones don't, that should give you an idea.

oh, and i saw you write something about not being a smart kid just because you can't spell, thats bullshit! Just because you can't write/spell does not mean your dumb, there's alot more to it than that. Everyone has stuff that they're good and bad at, and i'll bet that there is some stuff your better at than other people.

mike

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448762
Share on other sites

ADDICTED2R34s, wat nationality r ya dude?

Nationality is not important here and yes if you want to know how much your car worth you should have done your research on the tradding post, carsales...ect

nar its has a full bomex kit and yer i live in springy, and looked in post ect and found none like mine any wear as if no1 is selling there no turbos?? its a 1999. sry about spelling and that i cant spell i not a smart kid

You want people to understand you better and being able to help you out you should not use too much short cut.

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448815
Share on other sites

whole shit man theres non tubos on there that have no kits look pretty stock going 4 27k!!!

ye and thats y they have been there for a long time cause no 1 will buy them, how come u wanna sell ur R34, id keep it till im off my P's and then go GT-T, how old r ya now?

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1448999
Share on other sites

The same night on chaple my car copyed a yellow sticker on it lol,iam 17 man i lernt in dat car 4 2 years n know i wont something bit more quicker till i can handle power well and get a r34gtr in years 2 come i hope :)

btw i wasnt driveing that night my mate was i was just in front seat ,i got diked 4 nothing man the tested how loud my car was by one of the cops ears and my Gt wing could cut some1s hand,head,body ect n my number plate light was blown

Link to comment
https://www.sau.com.au/forums/topic/79494-my-r34-for-sale/#findComment-1452285
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...