Jump to content
SAU Community

Recommended Posts

Yes, I have searched - but didn't find exactly all the stuff I wanted to know. So:

1) What is (more or less) max boost for standard RB20 Turbo ?

2) Will R33 FMIC piping work with RB20 or is the pipework different orientation ?

3) Is the front/dump pipe of an R32 same as an R33 ?

4) Is the R32 4door exhaust (cat back) the same length and orientation as a 2 door version ?

5) Is the GTS-4 suspension (front and rear) same as a GTS-t or GTR or neither ?

6) Can you disable front wheel drive ina GTS-4 same as GTR (by pulling a fuse , which one)

7) Will adjustable exhaust cam gear give same benefits as RB25DET at 4 deg retard ?

8) Is the exhaust cam gear same as RB25DET ?

9) Is the AFM in RB20DET same as RB25DET - and will Z32 AFM help with increased resolution ?

10) Is it worthwhile getting RB20 turbo hiflowed with new (steel) wheels ? At what cost ? Or is it simply better/less cost to get a 2nd hand HKS 2430

11) Is the RB20DET and RB25DET exhaust manifold the same ?

12) Is mounting a FMIC on the R32 similar to the R33 ? Do you need to shave the front bar ?

13) What can max power the GTS-4 gearbox handle ?

14) Does GTS-4 come with LSD at the rear ?

15) Is the rear diff same as a GTR (ie R200) ie if I found an R200 locker would it bolt up ?

16) Who does R32 ECU re-chips / how much ? Is it better to just get an SAFC / Fuel Controller ? I know this doesn't adjust timing - but was thinking the cam gear could take care of this for moderate power. (AP Eng PFC too expensive for an R32 - bad cost/benefit for the value of the car)

17) With GTS-4 do the same tyre width on all 4 wheels apply - like GTR ?

18) What is safe power (rwkw) for standard internals ?

19) What sort of brakes are on the front of a GTS-4 , I think 2 pot - Will the R33 4 pots bolt on ? What size discs ?

Sorry for all the questions , some might be rudimentary I guess....

Thanks in advance Roy - for your help on these (as I know you will know all the answers - he he)

CHeers,

Link to comment
https://www.sau.com.au/forums/topic/80165-more-r32-gts-4-questions/
Share on other sites

1) What is (more or less) max boost for standard RB20 Turbo ? - 14psi

2) Will R33 FMIC piping work with RB20 or is the pipework different orientation ? - drivers side return pipe is different

4) Is the R32 4door exhaust (cat back) the same length and orientation as a 2 door version ?- 4 door is slightly longer

5) Is the GTS-4 suspension (front and rear) same as a GTS-t or GTR or neither ?-gtr i believe

8) Is the exhaust cam gear same as RB25DET ?-yes, inlet adj. cam gears are good as there is no vvt i think....?

9) Is the AFM in RB20DET same as RB25DET - and will Z32 AFM help with increased resolution ?-cubes is using a series 1 r33 i believe, and a z32 can be used as well...

10) Is it worthwhile getting RB20 turbo hiflowed with new (steel) wheels ? At what cost ? Or is it simply better/less cost to get a 2nd hand HKS 2430-previous owner of my car had this done, and it cost roughly $1100. It just made ~218rwkw @ 1.1bar recently on a tune

11) Is the RB20DET and RB25DET exhaust manifold the same ?- yes

12) Is mounting a FMIC on the R32 similar to the R33 ? Do you need to shave the front bar ? - yes

16) Who does R32 ECU re-chips / how much ?- Dr Drift...on these forums

I hope i got most of those right :cheers:

3) Pretty certain they are the same.

5) Same as GT-R

6) Yes

13) I'm running 180 Awkw through the stock gearbox

14) Viscous LSD, I believe

17) YES

19) 4-spotters front, 2-spots rear, probably the same as R33. A set of slotted rotors doesn't hurt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...