Jump to content
SAU Community

Recommended Posts

Originally posted by MrMayhem

i got a standard one on a neo if its the same you can borrow it as long as i dont need to hunt it up

i wouldn't have any idea whether they are the same or not, does anyone else reading the thread know if they are the same??

but if they are that would be much appreciated MrMayhem, and yeah it would only be a couple of days at the most and ya wouldn't need to hunt it up.

:-)

Cam

I would be really interested in what regulation actually dictates how loud a BOV can be. The only regs on noise coming out of a vehicle that I know of reffers to the exhaust. Have a mate who is a copper and he hasn't heard of it either. Truck air brakes can be notriously loud...

R33 Cam, is it possible to ask the guys when you go back next what the correct ruling on this, what are the maximum dbs allowed, and how/where they must be measured from (rpm, distance, angle etc). Or perhaps the EPA would be a better one to contact, because if it is noise related it would be their ruling?

Stevve

MrMahem:

Thanks for trying anyway man, much appreciated.

Nexus_SiX:

standard exhaust, hehe, i keep meaning to get in touch with ya but always forget, but maybe thats a good excuse/point now. are you north or south of the river??

Steve:

the guys at the pits said they aren't illegal as long as they aren't to loud, and apparently mine is too loud, well thats what he said anyway, i think it would just be easier to put standard one back on for going back over, as i dont wanna get on the wrong side of them, cause then they would prob pick alot more than they have.

Pva:

im not sure about the regulations on sound level etc etc, but his words at the pits were, i quote " your BOV sounds like a Mack truck parking" hehehe.

2rismo:

thanks and ill keep it in mind, if nothing comes up over here :D

MrSnrub:

Same Ben much appreciated for the offer, ill be in touch if nothing comes up, are u north or south of the river???

Originally posted by R33_Cam

....as long as they aren't too loud..... i quote " your BOV sounds like a Mack truck parking" hehehe.

This sort of thing really pisses me off. How bloody vague is that - probably no acutal rule on volume, IMO, this guy has his hand seriously attached to his d!ck. If it sounds like a mack truck is he saying mack trucks should all be defected? When was the last time he had his ears calibrated. I would be taking a copy of the notice, and going to see his supervisor (then taking my car somewhere esle to get the sticker off:) ) Where are you getting the inspection done currently, sounds like somewhere to steer clear of.

Happy now, I've had my vent:D

PVA Glue: the 96db, is that for the exhaust, or anywhere from the vehicle - I am pretty sure the exhaust has to be measure at a specific rpm, angle and distance from the muffler - does this mean that R33 Cam's BOV is loud enough to cause permanent ear damage to pedestrians? hehehe

Originally posted by Steve

This sort of thing really pisses me off.  How bloody vague is that - probably no acutal rule on volume, IMO, this guy has his hand seriously attached to his d!ck.  If it sounds like a mack truck is he saying mack trucks should all be defected?  When was the last time he had his ears calibrated.  I would be taking a copy of the notice, and going to see his supervisor (then taking my car somewhere esle to get the sticker off:) )  Where are you getting the inspection done currently, sounds like somewhere to steer clear of.

Happy now, I've had my vent:D  

PVA Glue: the 96db, is that for the exhaust, or anywhere from the vehicle - I am pretty sure the exhaust has to be measure at a specific rpm, angle and distance from the muffler - does this mean that R33 Cam's BOV is loud enough to cause permanent ear damage to pedestrians? hehehe

i just think there is one rule for some things/ppl and another rule for other ppl, etc etc. but agree totally with ya steve, so they sayin all air brakes and exhaust brakes on trucks should be banned, i dont think so!! and i think they are well in excess of 96db

im pretty sure it is 90db with exhausts, was last time i checked (bout a year ago) that is a stationary test, done at approx 1metre from exhaust outlet, at a certain RPM, depending on engine capacity.

is it adjustable?

cant u just tighten it right up so it doesnt open much, or muffle the noise with something.

then it passes with that BOV, get a permit for it, and adjust it back to where it was.

Then no more yellows.

BTW how do they test, do they drive it hard enough to build boost, or do they do it in neutral? I know i certainly wouldnt want some bodgy inspector driving my car enough to open the BOV.

Originally posted by deesh

I know i certainly wouldnt want some bodgy inspector driving my car enough to open the BOV.

I'd just say sorry mate, your not driving my car. It's not insured for you to drive it. *in your face!*

We all know their eyes light up when they see a performance car come through the pits :|

Not to sure on the exact details but the standards for road noise go like this.....

They take a bit of road and measure the car accelerate to 80 and stay there for a certain length of road. It has to be under a certain number of dB at all times.

Thems the Aussie standards all cars have to adhere to.

ah i have a standard BOV but im outta the country at the moment...

if im not mistaken the law concerning exhausts is 98db at a 1 metre distance when ure car is revved up to 1500rpms?

Cam - just out of curiosity, what BOV are u using that is deemed too loud?

bambam

Originally posted by Strich9ine

I'd just say sorry mate, your not driving my car. It's not insured for you to drive it. *in your face!*

We all know their eyes light up when they see a performance car come through the pits :|

And the reply would be,

'Sorry mate, you're not driving that car home, hand in your plates, and call a tow truck.'

The test drive is to check the car is safe to drive on the road, eg, no flat spots - I got done for a flat spot once.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...