Jump to content
SAU Community

First set of turbo's

Aztec

By Aztec,
in Engines & Forced Induction

 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted
TURBINE:

Wheel = 53.85mm

Exducer = 42.40 (??? Can someone confirm?)

Trim = 62

A/R = 0.64

COMPRESSOR:

Trim = 56

Inducer = 44.46

Exducer = 59.41

A/R = 0.42

TURBINE:

Wheel = 53.85mm

Exduce = 42.40

Trim = 62

A/R = 0.64

COMPRESSOR:

Trim = 55

Inducer = 44.59

Exducer = 60

A/R = 0.42

looking at these figures, does anyone have the same list of specs for the R34 GTR N1 ball bearing turbos. I would like to see how the three stack up?

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Beer Baron Grand Master

Beer Baron

Posted
Posted

you mean on intake side? ie .60 vs .42.

That's what i was trying to get at as haveing looked at a set of R34N1s the other day i noticed that it has .42 stamped inside the compresor outlet, but another set of R34N1s i've seen has .60 stamped on the outside of the comp cover. So could there be two configs of R34 N1s? Both I've checked were ball bearing, both had the split in the turbine housing seperating the wastegate flow from the turbine flow. Both also had .64 A/R stamped on the exhaust housing. interesting.

edit: also given that A/R is not a size as such (it's a ratio) how much difference in flow/horsepower potential is there between the .60 version and the .42?

lwells Grand Master

lwells

Posted
Posted
you mean on intake side? ie .60 vs .42.

Yes :D

i noticed that it has .42 stamped inside the compresor outlet, but another set of R34N1s i've seen has .60 stamped on the outside of the comp cover. So could there be two configs of R34 N1s?

I have heard of this too, but never seen it with my own eyes. Maybe someone can clear this up.

Beer Baron Grand Master

Beer Baron

Posted
Posted

yeah it's a mystery to me. I have definately seen both. the .42 ones are often mistaken for .60 as people don't look inside the housing for the A/R. where as the .60 ones are clearly marked on the cover. I would love to know what the deal is there, and also what the power potential of the two variants is?

edit: also the inducer and exducer measurements in the above 34 N1 spec are the same as (within .2mm) the SS and the -7s yet they quote a .60 A/R.

  • 2 weeks later...
  • 3 weeks later...
R32 TT Mentor

R32 TT

Posted
Posted
Bump.  R32 TT:  How's it all going?

G'day there Lucien,

Its all not going too well mate actually.

Got the car back together, had a few issues trying to tune it using MAP sensor only and so it was run well on the rich side to be 'safe'. Had it on the road just a couple of days and went down the Collie racetrack. Did only a handful of laps and boom.. blue smoke out the back and loss of power...

It would appear after a compression test that I have lost cylinder number 2.

Interestingly, since I broke the front stock turbo (which is what started this whole damn thing), and number 2 is directly in-line with it (ie the middle cylinder of the front 3), it will be interesting to get the motor apart and see if ceramic has made its way into the engine at all...

So, looks like I am off the road for quite some time. The bills getting it this far have been high enough. Doing an engine rebuild is just not affordable at the moment...

:)

  • 4 weeks later...
gtrhappydays Contributor

gtrhappydays

Posted
Posted
G'day there Lucien,

Its all not going too well mate actually.

Got the car back together, had a few issues trying to tune it using MAP sensor only and so it was run well on the rich side to be 'safe'. Had it on the road just a couple of days and went down the Collie racetrack. Did only a handful of laps and boom.. blue smoke out the back and loss of power...

It would appear after a compression test that I have lost cylinder number 2.

Interestingly, since I broke the front stock turbo (which is what started this whole damn thing), and number 2 is directly in-line with it (ie the middle cylinder of the front 3), it will be interesting to get the motor apart and see if ceramic has made its way into the engine at all...

So, looks like I am off the road for quite some time. The bills getting it this far have been high enough. Doing an engine rebuild is just not affordable at the moment...

:P

  • 1 month later...
R32 TT Mentor

R32 TT

Posted
Posted
does anyone know what boost level the actuators are set to on the 707160 series turbos?

i just got a pair of 707160-7's and it would be useful to know :P

Hi mate, mine were set at 8 pounds from factory. We reset them to 16. :)

lwells Grand Master

lwells

Posted
Posted
Interestingly, since I broke the front stock turbo (which is what started this whole damn thing), and number 2 is directly in-line with it (ie the middle cylinder of the front 3), it will be interesting to get the motor apart and see if ceramic has made its way into the engine at all...

Hi Mate,

Did you ever determine if ceramic dust was the culprit?

R32 TT Mentor

R32 TT

Posted
Posted
Hi Mate,

Did you ever determine if ceramic dust was the culprit?

Hi there Lucien,

Actually I got the motor out over the break and its just been sitting there. Haven't got the head off yet - but will soon. I am making a "shopping list" at the moment... for the full rebuild...

<_<

R32 TT Mentor

R32 TT

Posted
Posted
you dont need to upgrade the actuators. Simply get a boost controller and bleed air off ?

True, but its better to set the actuators as close as possible to the boost you are intending to run. It will build boost quicker than a boost controller detecting, compensating etc..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy 路 Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr 路 Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek 路 Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 馃槈. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 馃槏.
    • Marek
      WGNC34 - floor mats

      By Marek 路 Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 路 Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
脳
脳
  • Create New...