Jump to content
SAU Community

Recommended Posts

I have some R32 GTR parts for sale. If there are any questions regarding the parts listed below please do not hesitate to ask me.

Item: Standard RB26 Cam Gears

Item Condition: Great condition

Reason for Selling: Upgraded to aftermarket units

Price and Payment Conditions: $50

2785390590064171239S200x200Q85.jpg

Item: R32 GTR Standard Suspension

Item Condition: Excellent condition

Reason for Selling: Came in the boot of my car, missing strut tops.

Price and Payment Conditions: $250ono

2771510470064171239S200x200Q85.jpg

Item: Bar and Plate cooler 600*300*75

Item Condition: Brand new, never used.

Reason for Selling: Brother decided to sell his car. Did not install.

Extra info: This is my brothers part however I take full responsibility for the sale of this item.

Price and Payment Conditions: $300

1250130562064171239S200x200Q85.jpg1250130645064171239S200x200Q85.jpg1250130795064171239S200x200Q85.jpg

Item: Standard RB26 Air Flow Meters

Item Condition: One AFM has been trimmed due to clearance issues as high mount twin set up was used. Working order.

Reason for Selling: Upgraded

Price and Payment Conditions: $150

2075130270064171239S200x200Q85.jpg2746690420064171239S200x200Q85.jpg

Item: 40L Fuel Cell (Plastic with bladder)

Item Condition: Used

Reason for Selling: Not going to use it.

Price and Payment Conditions: $90

Item: RB26 set of 6 coils

Item Condition: Excellent working condition

Reason for Selling: Upgrade

Price and Payment Conditions: $180

Item: Veilside 3.5"exhaust

Item Condition: Great condition

Reason for Selling: Upgrading

Price and Payment Conditions: $200 pick up only

I am located in SE Melbourne and I am more than willing to post parts at buyers expense.

Edited by manage13
Link to comment
https://www.sau.com.au/forums/topic/80769-gtr-parts-for-sale/
Share on other sites

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

manage, when you say manifold what are you talking about are you talking about the bit that bolts between the head and the throttle bodies??? If so I will take it... Let me know..

  • 2 weeks later...

hi there,I am willing to give you $300.00 for the suspension including postage

if they are in very good condition.please email me asap.

regards

craig,p.s, im located in bunbury western australia,it might pay to call me actually on 0424279464.cheers

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
×
×
  • Create New...