Jump to content
SAU Community

Recommended Posts

thats what i would be guessing, aren't sr20's low revving engines? I haven't driven many, but thats what i'm thinking

i'd say if you wanted it be pulling still at those revs then you should've bought a skyline, feel free to correct me if i'm wrong though

not sure how high skylines revs ..but my car (s13) happily reves over 7500rpm hitting just over 10psi in my stock turbo

my strongest gears are 2nd and 3rd ...but as ppl said it is a 2L ..but it should still pull

4th gear is designed for higher speeds, not maximum torque..so if ur on a uphill still fighting for torque, try dumping it back to 3rd..and redline it :P

boost leak is not just in the turbo housings, you may find them on some of the pipine, go around and tighten all induction piping, look for oil leaks on pipes due to blowback.

Just go over every thing logicaly. Boost leak = piping, sprakplug gaps, coils really blocked air filter say you have a big fat rat in there when you boost no air for the motor = no power.

Slipping clutch.

last thing i can think of is it simply was to big of a hill and the poor car ran out of puff.

Oh one more thing, stock bov and internal gate check to see if they are stuck open.

See if you can get to full boost on flat road, after checking everything else.

another thing turbo may be d o a.

not sure how high skylines revs ..but my car (s13) happily reves over 7500rpm hitting just over 10psi in my stock turbo

my strongest gears are 2nd and 3rd ...but as ppl said it is a 2L ..but it should still pull

4th gear is designed for higher speeds, not maximum torque..so if ur on a uphill still fighting for torque, try dumping it back to 3rd..and redline it :(

is that an sr20 or a ca18?

The car would not run out of puff up a hill in 3rd after pulling itself up to 5000rpm.

If it can pull up to 5000rpm then it should be able to keep going. We're talking 3rd gear here guys in a turbo. If anything, power should increase as the revs raise and yes, they may start to drop off after 5000rpm but they won't drop so much that the car can no longer accelerate up a hill. If it can pull from 3000 to 5000 up the hill, then it's not going to stop suddenly at 5000.

I'd be guessing some kind of limiter for sure. Boost leak, overboost causing boost/fuelcut perhaps. But not the hill. If it was the hill, he'd know it.

I had a mate of mine who use to have an s15 to have a look at it.

He was saying it probably wouldnt be a boost leak because you'd hear it at 5000rpm if there was.

its running stock boost so i doubt it would overboost or "spike" from anything.

I think it might need a better airflow system (as it has stock filters and exhaust)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...