Jump to content
SAU Community

Recommended Posts

D1 drift and racing intercooler kits - one of the highest quality kits on the market. Now can be purchased without the a group buy at a extremely low price!!!.

For the next 10 kits only all piping kits are delivered for $350 and full kits are $530.. number of kits at this price left = 10

SPECS

Made from polished aluminium with no mandrel bend marks on any of the pipings. Piping is 2.5" and is very similar to the hybrid kits. The flange on the end of the piping is bigger than the hybrid kit for added support.

Silicon joiners are triple layer with chaffing on the third layer.

Clamps are stainless steel

All kits fit perfectly on the R33/R32 and the s13/180sx. When these were manufactured they were also tested on sample cars and the samples have also been tested in Australia. Many people have bought these kits without a single complaint

Will fit most hybrid coolers.

BONUS: All kits come with the nipple to hook up the turbo boost line too. Save a few $$$

Warranty

All kits are backed by an australian warranty 1 year.

Price

$370 delivered for the piping and $550 with the cooler (600 x 300 x 76 mm)

Arrival

Here now ready to go.[/color]

post-11183-1127990468.jpg

post-11183-1128725527.jpg

post-11183-1128725554.jpg

Link to comment
https://www.sau.com.au/forums/topic/81321-drift1-racing-intercooler-kits/
Share on other sites

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

My aussie supplier wants them out the door!!!! So I have the go ahead to sell each kit at $390 in a group buy or $420 without GB... Pm me or reply for more details. Be quick!!! at this price they wont last...

Ive already done a fair bit of mods to the back of the plastic part of the bumper and the front section of the chassis rails to mount the intercooler in there. As far as I can see I just need to cut and shut the two lower pipes to fit the extended end tanks, possibly using a silicone joiner, if not re-welding. This seems the best option short of making a custom set of pipes, which looks like costing around $300-350 in stainless mandrel bends and parts, let alone labour and hassle.

probably will be the cheaper and neater option to modify the d1 kit ....

I have a few kits at home now I will be taking a few picture of them and maybe tomorrow of next weekend putting it on my car and taking it down the drags to give it a test.. :cheers:

How do the piping kits fit in with the factory piping? Does it bend round and come back to the factory intercooler piping? Or does it curve round and come back over the top of the radiator and fans?

it curve round and come back over the top of the radiator and fans? yes that the one..

Just off topic: My mate has a s13 and just put one of my cooler kits on it. My car would be a mid to high 13 if I had decent tyres otherwise it is a 14.051. Anyway he flogged me (2 cars ahead at 140k) and this is the only mod he has done. Oh and apart from the fact that he forgot to hook up the wastegate :rolleyes: 15 PSI he was running. No ping either... Maybe because the cooler is working well - hot on the turbo side and freezing cold on the other...

hey raf, u have an r33 ey don't you?? during the install do you need to move the horn at all?? My horn is mounted next to the fan protruding in front, but the hybrid install ionstructions don't mention it. Any hints for install would be much appreciated.

Cheers

I just installed mine on sunday :) ... Yeah I had to move the horn. I placed it on the bonnet hinge bolts.. The wired will reach it you unclip one of the tyes...

IT took me 7 hrs to install the kit but that because I took my time painted painting the cut surfaces so it wont rust and trying to do a nice job... I forgot to get my camer and take pictures :) but I will take a few picture after my camera is charged an post them up...

I got an extra 1 psi and really noted the difference after I reset the ECU... if I take off like a grand ma, first gear starts spinning the wheels after 4000 rpm and spins most of second gear :) little chirp in 3rd.. Once I start playing with the boost then I should see some action...




  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...