Jump to content
SAU Community

Recommended Posts

Do you know anyone that works for a servo? I work for Bogas (Caltex) and I bought a 5 litre Havoline Fully Synthetic 5w-40 Oil for $25.... RRP $43. If you have mates that can get u inside prices it makes a big difference :D

Cheers

Sumo

Guest ylwgtr

i work at an auto shop and i can tell you that the cost of mobil one is very expensive even for us to buy......i dont beleive its available at a reasonable price.Personally i wouldnt use it for the following reasons.... 1.Its just had a price rise (the boss got the sheets and sent most of our order back!)

2.there are other oils which are just as good on the market.

I use the shell ultra which i change quite regularly.I swear buy this oil as i have a B2000 ute with a series 5 RX7 eng fitted and its a real work horse with over 200,000klms on the engine and its a healthy as when it was first fitted....and we all know how hard the rotory engine is on oil

I think it's a 15W...narky, can't remember the rear numbers. I've been advised to use thicker oils during summer. Right now using Mobil 1, some say it's too thin, some say it's good cos it allows easier flowing and turbo engines like thinner oils. Your call, but I'm going to try Shell Ultra Helix this time round....after all Ferrari F1 cars use it :bahaha:

And the Mclaren team uses *tadaaaa* Mobil 1 :P

If you've got extra cash to spend, use Redline engine oil!

Shell it is :P hell why not... i dont use anything but shell optimax either.... might get a shell sticker for my car aye? lol sif

will get some next weekend as i havent changed the oil since i had it... which has been about 4 months now :P oops :D

I agree - Mobil 1 is quite expensive.

I use Shell Helix Ultra as well, and picked up about 5x5litres of it from Super Cheap Auto when they had a 20% off day on boxing day :P

Regular price is around the $45 mark, although you can get it for around $42 on special. Between Kmart, Big W and Super Cheap Auto one of them will usually have a good price on Shell.

Forget Autobarn - they are always about $4-5 more (they also refused an unconditional 20% off voucher I got from one of those entertainment books on the oil :P )

Mobil 1 at best I've seen it at around $50. Usually more (56) from memory.

Shell Helix Ultra is fully synthetic, and has a viscosity of 5w-50w (the SAE grade). This refers to the thickness and the thiness of an oil. There is also another measure of oil quality, it starts with S for petrol?? SA,SB... etc, the higher the second letter the better. It should state somewhere in a service book that a car needs at least SC for example.

Honestly, I'm not sure this is overkill for the skyline, or if a regular or even a semi-synethic oil would also be ok. Opinions? If you have big mods and drive it hard, I'd use the good stuff and service it often. Basic mods and not so hard (like me) - maybe I can get away with something cheaper? I gotta say though, I do notice it, the car responds great from an oil change.

Ronin 09 -> close to 5ltrs (assuming you have no extra coolers and such) if in doubt, measure how much comes out when you change oil, along with the contents of oil filter.

i use motul turbolight 4100 10w-40 fully synth 5ltrs $37.50 all day everyday from racebrakes on racecourse rd.

:P

I thought that the first number in the rating of the viscosity when cold and the second number is the viscosity when warmed up? This is to ensure that there is good flow when starting up or when the external temp is cold, and thicker to aid heat transfer when warmed up? Or the other way around?? I could be thoroughly confused... i think i've gone cross-eyed...

lol i have no idea either im still trying to comprehend it all... i just remember being told to get (for my car) around 15w and i cant remember why they said that would suit it better... oh well

I've heard someone say the same thing (not sure how creditable the source was though). They said something like '5w is too thin for turbos'? Hmmm.... anyway. The Shell website's oil recommender recommends 15w-50w Shell Helix Ultra for a R32 GTR, although in the shops I've only ever seen 5w-50w Shell Helix Ultra?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...