Jump to content
SAU Community

Recommended Posts

HKS GT2530 turbos, HKS low mount manifolds, HKS dumppipes, upgrade actuators, comes with oil lines, bolts, front pipes, basically everything that is on the exhaust side comes with this setup including twin turbo pipe. turbos in good condition.

$3300

HKS? pod filter and adapters suit GTR+fittings

$180

HKS step 1 264 cams 3000kms old exellent condition

$800 pair

Sard injectors 660cc suit GTR or GTST top feed, Nismo fuel reg, standard GTR fuel rail modified to fit injectors, grex 275ltrs/per hour intank pump suit up to 350rwkw 3 months old $850 lot

Standard GTR rods

$180

Link to comment
https://www.sau.com.au/forums/topic/81641-gtr-parts-and-hks-turbo-kit/
Share on other sites

Asking for a mate.

How many k's have the turbo's done?

Any leaks, smoke out exhaust, shaft play, etc.?

How much boost were you using when they were installed?

Sard injectors are they; top feed(GTR) or side feed(33 gts-t)?

the turbos dont blow any smoke and are still in good condition, i think the turbos have done bout 3000 on my car and 15000 before i bought them of a mate. he was running 1 bar and i was running 1.4 bar

Asking for a mate.

How many k's have the turbo's done?

Any leaks, smoke out exhaust, shaft play, etc.?

How much boost were you using when they were installed?

Sard injectors are they; top feed(GTR) or side feed(33 gts-t)?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...