Jump to content
SAU Community

Recommended Posts

factory stats at the flywheel for the different models are below, it's hard to gauge power at the wheels, cause every dyno will read sligthly different

R32 RB25DE 132kw

R33 RB25DE non type-s 140kw

R33 RB25DE type-s 147kw

R43 RB25DE 147kw

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-1481865
Share on other sites

factory stats at the flywheel for the different models are below, it's hard to gauge power at the wheels, cause every dyno will read sligthly different

R32  RB25DE 132kw

R33  RB25DE non type-s   140kw  

R33  RB25DE type-s  147kw

R43  RB25DE 147kw

i remember hi performance imports magazine dynoed a rb25de , they eventually got it up to around 120 kw@ rw , mainly by playing with the ignition timing ( advanced few degrees ) improving air inlet and some other tricks . must find that magazine and be a bit more specific .

by the way whats the difference between non type s and type s ?

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-1484004
Share on other sites

i remember hi performance imports magazine dynoed a rb25de , they eventually got it up to around 120 kw@ rw , mainly by playing with the ignition timing ( advanced few degrees ) improving air inlet and some other tricks . must find that magazine and be a bit more specific .

by the way whats the difference between non type s and type s ?

i read that article too... it was on an series 1 silver sedan.

they advanced timing

fcd

removed standard airbox lid

added a cardboard snorkel

type s has been quoted to have an extra 7kw (and has an exhaust flap on the stock system)

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-1484270
Share on other sites

What sort of power can be achieved with an RB25DE ? Has anyone worked one ?

Have been wanting to change mine to an N/A since I saw a HCR32 modified to fit in an RB25DE ( in the turbo body with brakes etc. ) Yes the car WAS a turbo but had an N/A installed. The RB25DE was very worked but I don't speak Jap so I didn't find out the power output.

I know you think I'm :crazy: but if you could have heard this car go you would cream yourself ( snorting, farting, barking and growling sounds that no turbo car could EVER make !!! ) :wave:

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-1490561
Share on other sites

:werd:

This car I saw in Osaka had open alloy trumpets and you could look down them and SEE the fuel injector spraying !!! It also had extractors into a 2 3/4" system with one muffler, and then dumped out the side. The compression of the engine was so high that the air coming out the exhaust nearly un-tied your shoe laces !! :wave:

I just wish I had done the swap when I blew up my RB20DET. But the only thing that stopped me was the knowledge that I was going to have +200 rwkw. I now have the power but just wish I had the old school noise :kewl:

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-1490716
Share on other sites

So by that rational, it's possible to get good 150+rwkw with cams, injectors, head work etc. ( I suppose with REAL money spent, the number's could be higher ). But I guess it's more about the torque figure and where it all happens in the rev range.

I better start saving real hard :huh:

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-1494214
Share on other sites

  • 8 months later...
This car I saw in Osaka had open alloy trumpets and you could look down them and SEE the fuel injector spraying

by that you mean it had their own individual tb with bell mouths added to it. they make the engine scream and rev really loud haha.

damn its been awhile and i should've kept track of this thread. i totally forgot about it :worship:

R32 RB25DE 132kw

i thought R32's only came in RB20 dude?

i rekon the rb25de would be a good engine to work with. work it off its nuts then slap on a turbo man it would be a monster.

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-2119153
Share on other sites

by that you mean it had their own individual tb with bell mouths added to it. they make the engine scream and rev really loud haha.

damn its been awhile and i should've kept track of this thread. i totally forgot about it :devil:

i thought R32's only came in RB20 dude?

i rekon the rb25de would be a good engine to work with. work it off its nuts then slap on a turbo man it would be a monster.

Yes some R32s came out with a non-turbo RB25DE engine (although less powerful than the R33 version).

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-2122320
Share on other sites

  • 2 weeks later...
Yes some R32s came out with a non-turbo RB25DE engine (although less powerful than the R33 version).

yeh, I have an R32 RB25DE.. any light mods I can do? I'm a student so strapped for cash, but it does have a new air filter, performance clutch and exhaust.. what else could be done?

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-2151289
Share on other sites

  • 2 weeks later...
$300 will get you a set of Coby extractors from NZ. Very good build quality!

He said it already has a performance exhaust on it... so any gain would be minimal (surley).

yeh, I have an R32 RB25DE.. any light mods I can do? I'm a student so strapped for cash, but it does have a new air filter, performance clutch and exhaust.. what else could be done?

Perhaps getting some cams would help... provided you don't mind revs, that is.

Get a job when you finish uni and get a turbo (like I did). Till then, save your money, and enjoy your lightweight NA car

Link to comment
https://www.sau.com.au/forums/topic/81666-rb25de/#findComment-2181670
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...