Jump to content
SAU Community

The word "Jap", abbreviation or derogatory?


Recommended Posts

I came across an interesting thread on gaijinpot.com and the general consensus was that you should never say this word because it's highly racist in the same context as the "N" word regarding african americans.

Apparantly the racism associated with the word stems from WW2 (military propogander used racism to boost local morale and stuff) and has filtered through the years and stuck with this word.

However I don't see any problem with the word because whenever i use it, it's just an abbreviation or shorterning of the word japan much like the word aussie or brit, it's just easier to say jap than japanese and i guess its become habbit.

So whats the deal with it? Is it an outright racist word, racist through context or just an abbreviation for lazy guys like me who cant be stuffed with more than one sylabul?

well it is both, abbreviation as well as derogatory.

personally i hate it no matter how nice you say it. there is also an N word for japanese ppl but its straight up racist so no one says it, also from the war days. its short for Nippon for those who have no clue.

now for the abbreviation it may sound alright to you cos you are not the one listening to it and it is personal so i will respect that but i suggest if you can be bothered not to use it. it is a bad habit, its not exactly an excuse...

as for being derogatory it is questionable as it is in the context as mentioned in the other thread. let me give you an example of it:

"Oh you aussies cant do anything right, us japanese can do it so much better and faster!"

now this is pretty derogatory....

"Wow i love the aussie culture it is much more laid back and easy going than japanese culture!"

now this is not at all....

it is in the tone and how you say it but on forums and in writing it is harder to see so better to put japanese in my opinion. also aussie was never used as derogatory term so it is not a good comparison.

my solution is this and you will love it! just shorten it to J and call everything J

eg: J cars, J culture, J food, J music, etc. it is much shorter and no one will get offended if not a little confused.... also japan shortened is not exactly JAP its JPN...

i say do what you feel is right but dont be lazy and give ppl the wrong impression...

btw you seem to be able to write abbreviation ok but not japanese??? funny that...

masahiro

However I don't see any problem with the word because whenever i use it, it's just an abbreviation or shorterning of the word japan much like the word aussie or brit, it's just easier to say jap than japanese and i guess its become habbit.

My 0.02 cents is that its not what you think it 'sounds' like or what connotations you think it has, its what the listener thinks.

To my mind "Jap" is highly derogatory given the historical Australian animosity towards the Japanese post-WWII. There are very strong negative connotations associated with the abbreviation and as such I feel its entirely inappropriate to use it.

Lucien.

i think it's acceptable to talk about Jap-cars, or other inanimate objects (jap-tv, jap food etc), but I would never call someone 'a jap'. having thought about it some more in fact I would say it's best not used at all, but I don't see a major problem when using it the way i described above.

well it is both, abbreviation as well as derogatory.

personally i hate it no matter how nice you say it. there is also an N word for japanese ppl but its straight up racist so no one says it, also from the war days. its short for Nippon for those who have no clue.

now for the abbreviation it may sound alright to you cos you are not the one listening to it and it is personal so i will respect that but i suggest if you can be bothered not to use it. it is a bad habit, its not exactly an excuse...

as for being derogatory it is questionable as it is in the context as mentioned in the other thread. let me give you an example of it:

"Oh you aussies cant do anything right, us japanese can do it so much better and faster!"

now this is pretty derogatory....

Agreed

"Wow i love the aussie culture it is much more laid back and easy going than japanese culture!"

now this is not at all....

it is in the tone and how you say it but on forums and in writing it is harder to see so better to put japanese in my opinion. also aussie was never used as derogatory term so it is not a good comparison.

my solution is this and you will love it! just shorten it to J and call everything J

eg: J cars, J culture, J food, J music, etc. it is much shorter and no one will get offended if not a little confused.... also japan shortened is not exactly JAP its JPN...

i say do what you feel is right but dont be lazy and give ppl the wrong impression...

btw you seem to be able to write abbreviation ok but not japanese??? funny that...

masahiro

:werd:

agreed. my mates don't get how 'nip' or 'jap' is offensive. even though i tell them thes just like calling a african american 'African American'.

having said that i think i'd rather being called 'jap' than 'nip'

i ask this do you consider 'aussie' or 'pom' derogatory?

yes this could go on forever.

i mean we have poms, aussies, yanks, lebos, wogs, krauts etc etc

i think in this modern day alot of people dont realise the cultural importance (ie the derogitory nature) of these words.

I call my mates wogs, my mates call me a pom. I take no offence.

but if the japanese culture views this as an extremely offensive word like 'nip' then maybe we as a culture should attempt to be more sensitive.

I thought the words 'Jap' sort of dulled out the meaning and just became short for japanese towards and after 2000.

In the 50,60,70,80s and even the 90s it was offensive, but now i think alot of western culture just uses it as short without knowing its aggressive meaning.

Just like we call Americans - Yanks.

Michael

yes this could go on forever.

i mean we have poms, aussies, yanks, lebos, wogs, krauts etc etc

i think in this modern day alot of people dont realise the cultural importance (ie the derogitory nature) of these words.

I call my mates wogs, my mates call me a pom. I take no offence.

but if the japanese culture views this as an extremely offensive word like 'nip' then maybe we as a culture should attempt to be more sensitive.

I thought the words 'Jap' sort of dulled out the meaning and just became short for japanese towards and after 2000.

In the 50,60,70,80s and even the 90s it was offensive, but now i think alot of western culture just uses it as short without knowing its aggressive meaning.

Just like we call Americans - Yanks.

Michael

yeah i kind of agree about the whole poms, aussies, yanks, lebos, wogs, thing. as long as it's not 'nip' jap i don't mind. who are krauts again?

kraut = german

Kraut actualy means cabbage, the term is derived from sourkraut (sourcabbage).

I have 2 german parents but was born in aus and i take no offence if someone calls me a kraut, if anything i'd be proud of it (proud to have german heratige, not proud of what the country has done in the past)

  • 2 weeks later...

I don't think that comparing 'Jap' with 'Aussie', 'Pom' or 'Yank' is on the money.

IMO it would be more like Jap = Skippy = Seppo.

Being called an aussie is np, I am one ;), but if you stopped at the lights and shouted, "Learn how to drive Skippy mate!" I'd be pissed off.

I found out that JAP was not polite thing to say when I was very young. I used to watch a lot of Kung Fu movies and I vividly remember the Chinese and the Japanese hated each other. And the Chinese Kung Fu guys used to always say "Damn Japs". So when I see the word Jap, I would have to agree that it's totally disrespectful.

I'm from America and moved to Perth recently. I dont know if I was drunk or what but there is an actual place of business called Jap Import Parts or something like that. I was like What the hell! That's just wrong.

:P

Thats kind of what i was getting at. It's a word where the culture that uses it kind of defines whether its derogatory or not. I know that americans see it as a racial slur not an abbreviation. But in australia barely anyone uses it in that context

personally i think its the context that its in that gives the word the real meaning, so for people to refer to "Jap" stuff or people isnt derogertory, however if you were to use it in a sub standard manner then the word takes on a more "racist" meaning.

Pete

well as a japanese i have one thing to say to yall.

if you thought it was deregotary can you do us japanese a favour and school/educate the next person who uses it and maybe it will change....

i guess a lot of australian businesses use it as an abreviation so there is nothing to stop them.... from off the top of my head i can only think of Japanese Motorsport who actually put it in full... the rest is Jap this Jap that.... i guess those businesses have no deep interest in japanese culture...

masahiro

I'm from America and moved to Perth recently. I dont know if I was drunk or what but there is an actual place of business called Jap Import Parts or something like that. I was like What the hell! That's just wrong.

:(

Yep, I'm from Perth, and I remember seeing that company too! Now after 5 consecutive years in Japan, I KNOW I'm gonna cringe when I see all these aparently reputable companies using 'Jap' quite legitimately when I go back.

Hey Msahiro, we should make a **'Japan Foundation' in Perth where we try and educate and provide info on all things Japanese... I know it's been done at a corporate level already, but to aim it specifically to the 18 to 35 year olds would be pretty cool.

**Trade Mark. Don't steal my idea LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...