Jump to content
SAU Community

Recommended Posts

"104.7......thats so 92' "

i know that i only listen to battle of the sexes on that note how ****ing stupid is that sarah chick :D tripple j all the way the other dude that i car pool to work with listens to 87.6 and i agree alot of the stuff is the goods beau but for some reaon my alpine stereo wont go below 88 i think it is... dodgy station sif have some crappy number...

Link to comment
https://www.sau.com.au/forums/topic/81984-speed-camera/#findComment-1487904
Share on other sites

At least it tells you WHERE. When they first introduced the cameras, there were seven zones. The first version of the map had ~ 25. Last time I looked there were 54, now there are 60+. I've been keeping an eye on it ever since I almost got caught on a 'deserted' road going a bit quick. And for reference, the cameras have a +/- 320kph capability, a focal length of around 100-150m, and were not designed to be used in the back of a van. They don't auto focus quickly so fast decelleration gives a bad photo. They can tell your speed, however, at a range of over 500m...

Link to comment
https://www.sau.com.au/forums/topic/81984-speed-camera/#findComment-1490955
Share on other sites

i had a silly incident today on the way to work and almost got done along adelaide ave. was 'having fun' with jimi's bro (davey) and we came across the van. i saw it first on the skids. i think i got away with it though, cause i was behind him. lucky....

Link to comment
https://www.sau.com.au/forums/topic/81984-speed-camera/#findComment-1500204
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...