Jump to content
SAU Community

Recommended Posts

Forcefed: To take your questions seriously for a change, regardless of the fact that I think your an albeit entertaining tool, I think if I had $30-$40k to spend on a performance car that is either a:

s13, s14, s15

or

r32, r33, r34  

etc

And the goal was performance, you CAN not go past either an r32 GTR 15y+ model with $20k of engine mods spent on it, or an s15 with $15k of mods thrown at it.  

I could go in to why, but tell me why you think these would both be good options?

These would both be good options because as soon as you have bought a GTR or S15 you already have a very capable car without throwing much money at it. So yes, $20k of modifications would certainly do the trick in the way of performance on either of these cars. I don't see exactly what you're trying to clear up here, I'm not a complete idiot, I would take a GTR over an S13, S14 or S15 anyday, but on a budget I would have to go the Silvia for a road car.

I'm not a complete idiot
:crazy: only 9/10th's of one. j/k

what he's trying to tell you is that a skyline of the same age and spec (ie rwd single turbo, HICAS, 2 door) is around the same cost as the corresponding silvia. So there's no real advantage in choosing a silvia purely for initial purchase price savings.

Sure they give more gains per dollar spent on them up to a certain stage, but a corresponding skyline has the potential to go beyond that.... and still be streetable.

For me, it would depend on what I'd want to do with it.

If I was doing street sports (either country driving, or hillclimbs and some Targas) I'd get the Silvia. Its lighter and shorter, which makes it a lot more nimble. An SR20DET is a nice engine and can be reasonably powered up, which means you can always make more power than you can use (at which point the RB25's capacity advantage means nothing, it just makes more power you can't put down).

On the track I'd take the Skyline. The longer wheelbase means its more stable on the relatively open corners (compared to the Old Pac, or Mac Pass, or Nasho) and I can eventually screw out more power that I can actually use. The weight thing is always present, but you can go further with weight reductions for a primarily track car.

For commuting.....its hard to choose. The Skyline is comfier and more stable, but the Silvia is more fuel efficient and easier to park.

An SR20DET is a nice engine and can be reasonably powered up...

True, but if I was going to put my money into a Silvia I would go for an RB20DET, ultimately a better and smoother motor than 4-cylinder SR20DET.

I dont see the reasoning in putting an rb20 in, as the engine is heavier you start messing with the weight distribution, for the money spent you could modify the SR to easily surpass the rb20, and since you are going going to the trouble of doing a conversion anyways it seems more logical to go all out and put an rb25 or rb26dett in.

True, but if I was going to put my money into a Silvia I would go for an RB20DET, ultimately a better and smoother motor than 4-cylinder SR20DET.

Sure, if you've got an unlimited budget and if you'd like to ruin your Silvia's weight distribution by using a long, cast iron engine instead of a shorter, all alloy one.

:roll:

The only way an RB20 works better than the SR is the sound, and the fact that you can then easily put a bigger RB in it. But, cost for cost (until you hit big budget, at which point you should have just bought a GT-R instead) an SR20 would at least keep up with an RB20 in the straights, and pull away in the corners.

  • 3 weeks later...
I disagree that Silvia's and Skyline's are in the same price range, you say a GTS-t is in the same price range as an S13, when you said a GTS-t would set you back an unbelievably cheap $16k! WTF?

$16k GTS-T is unbeleivably cheap? Dude, I got my 32 GTS-T imported and on the road for under $10k.

And in regards to engine choice, whilst I prefer my RB engine for it's refinement (easily more refined than my dad's 10 years newer supercharged commodore V6), an SR20 will always give the better weight distrobution (shorter and lighter), so for me I don't see the benefit in swapping it out. Plus, the SR20 will put out more power than you will ever need once modified. I also found the RB20 to be ever so slightly laggier than the SR20, stock vs. stock, although most probably woudn't notice/care.

I am not sure definitely as I've never driven an S13.. but I'd imagine the tailhappy rear could be a disadvantage when cornering?

They tend to use the S13's rather than the R32 (as much - they drift plenty of R32 I know) for drift, as it has a much more slidey tail. This would actually be a disadvantage I would have thought when trying to get power to the ground??

There were a few R32 that came in under the 15 year rule (like mine) for around $10k but now that is not available the price has jumped up a few $k.

$10k only gets you something fairly basic in terms of an R32 - I am probably up to around 12k with the basic mods, and only now does it feel like its actually just getting fast enough.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...