Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

does anyone have any s2 c34 brakes that they dont want?

doesn't matter if they are a bit warped, and the thicker the better

also the cheaper or freeer the better

chiuck me a pm if you can help

qld preffered

I have now bought my replacement calipers from off a r33gtst, sumitomo 4 pots ( front ) ans sumitomo 2 pots (rear).

I shall get the gtst discs front and back next.

I have a question, will these calipers and discs fit with the standard 16" wheels? Series1 stagea.

I hope so!!!!

R33's come with 16's standard so you know the diameter will be ok. To quickly check the offset/disc clearance just make sure you have atleast 20-25mm of extra space between the rim and the stock 2pot caliper, the 4pots stick out around that much further than the 2pots.

Edited by QWK32

Hey guys Im looking at a complete brake overhaul for my S1,

just wondering on recommended people to go see in Adelaide southernish area

anyone had dealings with All Clutch and Brake Services? from what im told i need my calipers need to be overhauled, new pads and new rotors, my stag is reasonably stock (soon to add boost controller and safcII) so just wondering what you would recommend as I dont think i will need to upgrade too much even though there will be more power

cheers

Can't suggest a shop but can recommend you get some better quality pads and replace fluid with Motul RBF600. If you are not a driver who stands on their brakes all the time and not intending track days then that and new stock rotors should be fine.

Can't suggest a shop but can recommend you get some better quality pads and replace fluid with Motul RBF600. If you are not a driver who stands on their brakes all the time and not intending track days then that and new stock rotors should be fine.

i've done a lot of reading and for a sports pad or to increase the capability of your brakes i'd be looking at some qfm pads

think they are still developing the s1 pad so maybe you could look at getting someones s2 brakes and get those put on, this will get you up to a 290mm rotor which is closer to acceptable for a car of the stageas weight

how much were you looking to spend on recoing the stock brakes?

how much were you looking to spend on recoing the stock brakes?

I assume that last bit is directed at me too be honest I have no idea hence why i came to the bible of stagea knowledge... what ever it costs to a decent but not over compensating as i will probably be getting rid of the car this year and it will never see a race track

I assume that last bit is directed at me too be honest I have no idea hence why i came to the bible of stagea knowledge... what ever it costs to a decent but not over compensating as i will probably be getting rid of the car this year and it will never see a race track

why change it then? rebuild kit will be hard to get and exxy. callipers leaking? get some cheap s1 replacements from someone who has upgraded

anyone in adelaide know where i can get slotted disc's for my s2 stag? also what pads do you guys reccomend for high performance street use.....i.e. occasion track day? any estimates on prices?

qfm ar1m pads, now for s2 stags, ebay $179 = win

less dust than bendix ultimates and waaaaaaaaaaay better performance, that with slotted rotors will be a good upgrade

pm "rs73" he could get me new slotted rotors very cheap

why change it then? rebuild kit will be hard to get and exxy. callipers leaking? get some cheap s1 replacements from someone who has upgraded

*n00b statement* mechanic told me the calipers needed a full overhaul and it would take a couple days plus apparently the rotors are warped.... brakes pulse a bit shudder when hot under hard braking.

the next step was going to see if i could get some second hand ones but i dont really know what im looking for... im guessing if i get second hand calipers its probably still a good idea to get new discs and pads?

*n00b statement* mechanic told me the calipers needed a full overhaul and it would take a couple days plus apparently the rotors are warped.... brakes pulse a bit shudder when hot under hard braking.

the next step was going to see if i could get some second hand ones but i dont really know what im looking for... im guessing if i get second hand calipers its probably still a good idea to get new discs and pads?

if rotors are warped then you may be able to skim them (lathe them flat) but if they are worn and already getting pretty thin then this is not a good idea

second hand calipers can be had cheap, just look at the pistons and dust seals and make sure they havn't been leaking

qfm ar1m pads, now for s2 stags, ebay $179 = win

Thanks mate, just one favor to ask, if you're going to purchase please don't go through ebay. Contact us direct on either 1300 884 836 or email sales at gslrallysport dot com

We'll still honor the free shipping as per on ebay.

Regards,

Greg

Thanks mate, just one favor to ask, if you're going to purchase please don't go through ebay. Contact us direct on either 1300 884 836 or email sales at gslrallysport dot com

We'll still honor the free shipping as per on ebay.

Regards,

Greg

no worries, still holding off on mine as im not sure if im gonna get r34 brakes yet

how come not through ebay? do sau members get a discount?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...