Jump to content
SAU Community

Recommended Posts

Hey Guys,

Been outta the loop for awhile cos the cars been off the road :D

Thinking about going the next step and getting some internal work done while my gearbox is rooted :(

Primarily thinking gavin woods because the main thing im looking for is QUALITY

Has anyone got engine internal work done at gavin woods?

Will be making the necessary phone calls etc once the money is there to be used but for the moment can anyone tell me if Gavin does the engine building themselves or contract to another place?

Also, who else can provide quality rebuilds including machining (ill be supplying most of the parts) in brisbane>?

Most likely looking to spend around 6k, something like;

Forgies + N1 rings, N1 bearings and reconditioned GTR conrods plus all the balancing and machining etc

To eventually mate with a 3037s @1.5bar + all supports :D

Any advise would be great, as im kinda throwing ideas around at the moment.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/82149-gavin-woods-for-rebuild/
Share on other sites

JHH for rebuild. At least talk to John at JHH, I dont have the number handy but it should be in the white pages. He is really quite good. But one thing LISTEN to him, do NOT say I am having this this and this. He knows what he is talking about. One case, the guy gave him cams, and well, dont do that when you have a 300zx, it costs a LOT of money to keep pulling the engine out, and putting it back.

But yeah, JHH for PM!

Hey Guys,  

Been outta the loop for awhile cos the cars been off the road :cheers:  

Thinking about going the next step and getting some internal work done while my gearbox is rooted :)  

Primarily thinking gavin woods because the main thing im looking for is QUALITY

Has anyone got engine internal work done at gavin woods?

Will be making the necessary phone calls etc once the money is there to be used but for the moment can anyone tell me if Gavin does the engine building themselves or contract to another place?  

Also, who else can provide quality rebuilds including machining (ill be supplying most of the parts) in brisbane>?

Most likely looking to spend around 6k, something like;

Forgies + N1 rings, N1 bearings and reconditioned GTR conrods plus all the balancing and machining etc  

To eventually mate with a 3037s @1.5bar + all supports :D  

Any advise would be great, as im kinda throwing ideas around at the moment.

Cheers!

IF THIS IS ANY HELP TO YOU I AM CURRENTLY GETTING MY ENGINE REBUILT AT TOTAL PERFORMANCE BY ANDREW. IT IS IN LAWRENCE DRIVE, NERANG. SHARING A SHOP WITH DYNO SOURCE. ALL HE EVER DOES IS REBUILD ENGINES FOR SKYLINES. HE HAS DONE A COUPLE OF GEARBOXES FOR OUR FRIENDS AND THEY WERE REALLY HAPPY WITH HIM.

Ok thanks for the replies

Can anyone give me an estimate on the labour/machining/balancing costs?

I was thinking about $2000

anyone thats done this tune in and give me some info :cheers:

Can the rb26 HKS 2.7L stroker kit be used on an rb25det block safely?

IF THIS IS ANY HELP TO YOU I AM CURRENTLY GETTING MY ENGINE REBUILT AT TOTAL PERFORMANCE BY ANDREW. IT IS IN LAWRENCE DRIVE, NERANG. SHARING A SHOP WITH DYNO SOURCE. ALL HE EVER DOES IS REBUILD ENGINES FOR SKYLINES. HE HAS DONE A COUPLE OF GEARBOXES FOR OUR FRIENDS AND THEY WERE REALLY HAPPY WITH HIM.

I think you need a keyboard rebuild...

knore, John at JHH did my RB26 & it has performed flawlessly. Unlike many other "engine builders" all he does is rebuilds & machines engines, he is not a tuning shop that sub-contracts the work & puts on a mark-up. Have a look at some potential workshop/s & JHH's & you will probably see one with a lot of specialist machining equipment & one without. He does a stack of RB engines & other Jap engines including Colin Wilshire's 8sec Datson ute etc who also speak highly of him.

I have had this recently done to my RB25

bore and hone 20thou

replace all welsh plugs

complete balance

fix some minor block issues

reclaim some of the crank

linish crank

acip dip and clean

assembly

HEAD

full clean

reface valves, new seats, pressure test, resurface

and someother shit ive forgotten off my invoice for $2509.32 hahahaha

that was through a workshop in Cairns so i'd assume you get better prices down south just to give u an indication

knore, John at JHH did my RB26 & it has performed flawlessly. Unlike many other "engine builders" all he does is rebuilds & machines engines, he is not a tuning shop that sub-contracts the work & puts on a mark-up. Have a look at some  potential workshop/s & JHH's & you will probably see one with a lot of specialist machining equipment & one without. He does a stack of RB engines & other Jap engines including Colin Wilshire's 8sec Datson ute etc who also speak highly of him.

He also does the 'Jett racing' cars from memory. Few others. Daniel who is next door normally does a lot of the pulling out of the engines etc. Id recomend him highly for the 'mechanic' bit.

Ok thanks for the replies guys,

so nobody knows if gavin does the engine work himself?

ill havta make some phone calls but the only way im pouring money into this is if i trust the people 100% otherwise ill just put the new gearbox in my car, sell it and go for a GTR instead

1992-93 GTR are around low 20's landed ;) probably less stuffing around..

Yeah true that,

I was kinda under the guise of either turn current car into a monster or get a shitbox for awhile and save for something thats a big step up.

Still going to do some investigating, but might put new gbox in and front tyres just to see if the gtst will sell quickly, if so, guess its a pintara or magna to put around in for awhile :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...