Jump to content
SAU Community

Recommended Posts

copper is a better conductor, but thermally breaks down quicker.

If your car is a street car, dont waste ur money on iridiums, coppers changed every 15,000Km is much better... I don't know anyone that has kept platinum/iridium plugs on a high performance car for 100,000km.

If you race on a cuircut, then iridiums are better as they can take the abuse from the high temps...

Link to comment
https://www.sau.com.au/forums/topic/82224-iridiums/#findComment-1491264
Share on other sites

i had some problems with iridiums at the start missfiring after 4000. then the problem seemed to go away when i gapped them to .6. still happened every now and then. i would go the copper ngk thats what i swapped to and since have had no probs.

Link to comment
https://www.sau.com.au/forums/topic/82224-iridiums/#findComment-1491445
Share on other sites

B/S???

Iridiums will last 100,000 km's on a stock car....

As for copper - this is from Unique Autosports Dyno web page:

"Both of these items often pay for themselves by providing better power and economy. Iridium spark plugs often make more power than copper or platinum even if they are in good condition, especially at higher than standard boost levels."

Link to comment
https://www.sau.com.au/forums/topic/82224-iridiums/#findComment-1494839
Share on other sites

This Table  shows the conductivity of several metals.

Copper is clearly a better conductor.

Iridium has better corrosion resistance, thus lasts longer.

choose the plug that best suits your needs. If you cant be f*cked changing plugs every 15K - 20K km, then get iridiums.

That table shows thermal conductivity. Not electrical conductivity. 2 different things.

That said, I dont know whether copper or iridium is the better electrical conductor.

Also, AFAIK the iridiums used in skylines are have 0.6mm tips, which only has a 60000km life, not 100000km.

Link to comment
https://www.sau.com.au/forums/topic/82224-iridiums/#findComment-1494958
Share on other sites

Cheers.

Hmm Copper a better conductor then gold?? I thought gold was a better conductor.

What's the point of gold plated ends on audio cables etc? Wank?

Pure copper is better, but I dont believe spark plugs are pure copper otherwise I think it will be too malleable, and would corrode quickly.

I think they add other metals to make it more durable, but I might be wrong...

Link to comment
https://www.sau.com.au/forums/topic/82224-iridiums/#findComment-1496364
Share on other sites

I've got iridiums left at stock gap of 1.1mm.

I got plenty of missing at 12psi. I taped up the coilpacks and it disappeared.

Came back when the weather got colder (oh and i happened to up the boost to 1bar), so i bought some splifires and problem solvered.

Link to comment
https://www.sau.com.au/forums/topic/82224-iridiums/#findComment-1505493
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
    • There's one for sale at Grand Auto Wreckers in Lonsdale (SA), for .... let's suggest the sum they're asking for will make you cry. You may have to embrace the idea of modifying the rear subframe to accept some other diff. You could probably find a way to wangle a shortnose into there, with a custom rear adapter and some sort of shenanigans to relocate the front mounts. This has probably already been done by others, so there might be some guidance available as to how easy/impossible it is, out there in the googles. But you possibly needn't restrict yourself to Nissan diffs if you're going to contemplate that. There are similarish Toyota diffs, possibly some Euro ones, possibly some Seppo ones.
    • The ball joint taper and arm taper have to match angle and diameter, but just doing the bushes is a much better option.....seems like the industry moved to "it is cheaper to replace the whole arm than take on the labour for changing this bushes", glad the aftermarket supports it
    • Gee she looks a bit rear heavy in that first pic! Sounds like a great project with the kids, but as I guess you know R series stuff is getting hard to find and pre that is pretty much impossible these days
×
×
  • Create New...